You can add a new press to the ShopMap.
- If the ShopMap is not currently shown, click the ShopMap tab.
- Click the Press tab.
- Click New.
Perform the following actions:
In this box Do this Name Type the name of the press. Units Select the units to use to define the attributes of the press.
Setback Type the distance that you want the press sheet to be set back from the edge of the plate.
Gripper Type the distance that is used on the paper for the paper gripper.
Plate bend Type the distance that is used on the plate for the bend.
First knife Type the distance from the edge of the sheet to the edge of the die.
- Click Create.