Adding a press to the ShopMap

You can add a new press to the ShopMap.

1. If the ShopMap is not currently shown, click the ShopMap tab.
2. Click the Press tab.
3. Click New.

4. Perform the following actions:

   In this box	Do this
   Name	Type the name of the press.
   Units	Select the units to use to define the attributes of the press.
   Setback	Type the distance that you want the press sheet to be set back from the edge of the plate.
   Gripper	Type the distance that is used on the paper for the paper gripper.
   Plate bend	Type the distance that is used on the plate for the bend.
   First knife	Type the distance from the edge of the sheet to the edge of the die.

5. Click Create.