Special Toner is typically a fifth print station on the digital press. It is usually used to highlight specific areas on the print and provide special effects on the printout.
In this activity, you will use the special toner High Gloss Clear coat as an example.

Create a job

1. If it is not already open, start Prinergy Workshop.
2. In Job Finder, right-click your main group, and choose New Job.
3. In the Create New Job dialog box, select the server name and volume.
4. Type the job name XX_Spot_Color (where XX represents your initials).
5. Click Create.
6. Minimize the Job Manager window.

...

1. From your workstation, locate: Prinergy Activity Practice Files / Act_46_Spot_Color / Input File
2. Restore Job Manager.
3. Open the Input File folder. 
4. Drag the Wells Brochure.ps to the Job China Adventure with Varnish.pdf file to the Job Manager's Input Files area.
   
5. In the Add Input Files dialog box that appears, under Options, clear the Process Selected Files Using Process Template check box.
6. Click OK.
   Your file is copied to the UserDefinedFolders folder.
7. Minimize the Job Manager window.

Refine the input

...

file 

1. In the Input Files pane area, right-click XXXXXX click the China Adventure with Varnish.pdf, and choose select the process template: Refine  > > Refine  > > 1stRef-Normz.
2. In the Start Process dialog box, click the Edit Process Template button.
3. Expand the Spot Color Handling section.
4. In the Map Spot Colors area, select the Enable Spot Color Mapping check box.
5. Select the Don't Map Spot Colors option.
   
   
   
   
6. lick Click OK and then click OK again.
7. In the Pages area, select all the pages and right-click them.  China Adventure with Varnish.p1.pdf.
8. From the Menu menu that appears, select Refine > Refine > 2ndRef-MapColors.
9. Click Color Mapping.
   
   Image Added
   
   
10. Make sure that the the Special Toner’s Spot is not red spot color is converted to process colors during the Refine process., and that the varnish spot color is set to Separately.
11. Click lick OK and then click OK again.

...

1. In the Pages area, select all the pages of your job.

2. Right-click the selected pages and from the menu that appears, select Send to Digital.

3. From the list of digital devices that appears, select the required device.

4. In the Digital Job Ticket Editor that appears, click the Substrate tab.

5. Select the required substrate and then in the Output Profile list, select the device or paper or paper profile that was specifically set specifically set up for the printing condition of the device you are printing to. 
6. Click the Special Toner tab.
   
   Image Added
   
   Note: Options on this tab may vary depending on the selected digital device. Some of the settings or setting values may not be available. Also, there may be additional settings available for specific devices which are not documented here.
7. In the Special Toner list, select the required special toner name. The Special Toner list contains only toners that are available on the selected digital device.
8. In the Separation To Print list, select the  select the separation name used in the document from the list of separation names, or select Custom if the separation name does not appear in the list.
9. required special tonerIf you selected Custom in the Separation To Print box, in the Separation Name box, type the exact name of the separation to be printed using the special toner. In this activity, in the Separation Name box, type Varnish.
   
10. Click Submit.