Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published by Scroll Versions from space PANTWK and version Pandora_Training_Working_8.4
Sv translation
languageen
  1. When is it necessary to create a wrapped step-and-repeat layout?

    Expand
    titleAnswer...

    Wrapping a step and repeat layout is used for certain types of gravure cylinders or flexographic sleeves that have no leading edge and are continuous.

  2. How do you create a wrapped step-and-repeat layout?

    Expand
    titleAnswer...

    a. Right-click the artwork on the substrate and select Step & Repeat, or from the Object menu, select Step & Repeat.

    b. In the Layout section of the Step & Repeat dialog box, enter the horizontal and vertical position, and select the Wrap Top to Bottom check box.

    c. In the Steps section, specify how many times the artwork is repeated horizontally and vertically, and enter the gap or distance.

    d. In the Stagger section, enter the type of stagger and the amount. 

    e. Click OK.

  3. Why would you duplicate a mark rather than step and repeat it?

    Expand
    titleAnswer...

    Duplicating a mark enables you to adjust each of the marks individually.

Sv translation
languagefr
  1. Quand est-il nécessaire de créer une mise en page de copie en répétition enveloppée ?

    Expand
    titleRéponse :

    L'enveloppement d'une mise en page de copie en répétition est utilisé pour certains types de cylindres en creux ou de manchons flexographiques continus, sans bord tête.

  2. Comment créer une mise en page de copie en répétition enveloppée ?

    Expand
    titleRéponse :

    a. Cliquez avec le bouton droit de la souris sur la maquette du substrat et choisissez Copie en répétition, ou sélectionnez, dans le menu Objet, Copie en répétition.

    b. Dans la section Mise en page de la boîte de dialogue Copie en répétition, saisissez les emplacements horizontal et vertical, puis cochez la case Enrouler de haut en bas.

    c. Dans la section Copies, spécifiez le nombre de répétitions horizontales et verticales à effectuer sur la maquette, puis saisissez l'écart ou la distance.

    d. Dans la section Décalage, saisissez le type de décalage et la quantité. 

    e. Cliquez sur OK.

  3. Pourquoi reproduire un repère plutôt que le copier en répétition ?

    Expand
    titleRéponse :

    La reproduction d'un repère vous permet d'ajuster individuellement chacun des repères.