Troubleshooting a CPCC setup

Confirm that the following items have been correctly set up:

1. The media is calibrated.
2. The CPCC Layout is a New layout.
3. The Color Bar must be the first file to go through the new CPCC Layout.
4. The correct Color Bar is selected in the CPCC Layout.
5. The ICC profiles are signed.
6. The signed ICC profiles reside on the Prinergy server.
   Prinergy will automatically pull the signed ICC profiles from the KPS controller, unless there is a network issue that prevents this from happening.
7. In the Marks section of Prinergy output process templates, under Extra Margin for Marks and Bleed, the margin values for Left, Right, Top and Bottom are set to zero.
8. When working with ColorFlow, all the ColorFlow generated PCO, DeviceLink and Device ICC profiles are exported out, signed in KPS, and then imported back into ColorFlow.