Page History

...

Use either an external hard drive or a network location for the data. If necessary, you can use non-erasable DVDs, however backing up to DVDs can be a very slow process and require multiple discs. The amount of space required varies with each system.

Creating a Windows system image backup file and recovery disc for Dell 7040 Controller

Immediately after installing and configuring Kodak Proofing Software on a clean system, use the Windows tools for creating a restorable system image backup and a bootable recovery disc.

...

1. Ensure that the backup media is ready to receive the data. For example, connect the external drive or map the desired network drive and check that it is accessible.
   You can also use DVDs, but this may take considerably more time.
   Note: The backed-up data must later be accessible and available for restoring on the upgraded system.
2. Use your preferred method to access the Windows Backup and Restore or System Image Backup tool.
3. Click Create a system image.
4. Follow the on-screen instructions as they appear.
   If prompted, provide your Windows administrator password or confirm your action.
5. When finished, clearly label the backup media, and store it in a safe and secure location. 
   Important: If you backed up to a network location, copy the folder to a different location. Otherwise, it might inadvertently be overwritten by subsequent backups if the same location is used for storing periodic system or data backups.
6. Return to the settings and click Create a system repair disc. 
   Note: This is an important step for systems that do not ship a Windows operating system installation disc.
7. Follow the on-screen instructions as they appear. 
   If prompted, provide your Windows administrator password or confirm your action.

Creating USB Thumb Drive Backup for Dell 7050/7070 Controllers

Immediately after installing and configuring Kodak Proofing Software on a clean system, create the Windows 10 LTSB system image backup.

Requirements: A 64 GB USB Thumb Drive is needed to ensure sufficient capacity for the system image backup.

1. Format the USB v3.0 Thumb Drive as NTFS.
2. Once formatted, remove it and any other USB drive.
3. Load the WinPE CD/DVD disk.
4. Reboot the system.
5. While the machine is restarting, press and hold F12 to enter the BIOS.
6. Select CD/DVD/CD-RW Drive from Legacy Boot.
7. When the KPS System Installer Tool menu appears, select Backup.
8. Click OK when the message “This will create a Backup of your System and Data Drive” appears.
9. Insert the NTFS formatted USB Thumb Drive in the left slot (blue colored slot) when the message “Please Insert the USB Drive to save the Image Backup” appears and click OK.
10. Backup will start.
11. Click OK when the “Completed” message appears.
12. Remove the CD and the USB drive when prompted.
13. Click Restart.
14. Label the USB thumb drive and store it inside the DVD box.