The following settings are specific to the ACM format. For example, only ACM files support etching the label into the back plate material before the label is inked.
Min Split Length
Specify the minimum split length. By default, any cut line longer than 508 mm (20 in.) is cut from the center outward, to prevent the plate from moving or lifting on the cutting table.
Camera Marks
Select the desired camera mark. Cutting tables that use ACM files require camera marks, which are automatically placed in the output TIFF file.
Camera mark location
Specify the placement of the camera marks.
Camera mark count
Place either 2 or 4 camera marks. For some configurations, 4 camera marks provide a more precise cut.
Label etching
For more permanent labeling, select this option to etch (lightly cut) the label into the plate before it is inked.
Label position
Specify whether to place the label at the center, top, bottom, left, or right side of the plate or TIFF file.
Label font size
Specify the default or maximum font size for labels.