ID | Description |
743 | Cutting table—When Preferences > Cut > Round corners is enabled, some masks result in incorrect cut shapes. |
729 | Image distortion is observed in saved file after opening a 4800x2400 TIFF file, rotating it, and saving it. |
728 | Auto Arrange could not fit an image with the exact same size as the layout onto the layout. |
721 | Spot color is not recognized correctly through Convert to PDF hot folder type. |
719 | Cutting table—Camera marks are corrupted when using an odd asymmetric resolution layout created from the input file. |
708 | Cutting table—Support extracting cut masks from LEN files ripped from Imaging Engine or Pixel Machine. |
701 | Output error when using Invert Trim Waste with Japanese layouts |
684 | Some Hyperflex HF2 Tag combinations are not honored by Esko workflow. |
682 | Cutting table—Some masks result in image being cropped off incorrectly after applying the mask. |
681 | "File is not supported" error when previewing TIFF files with Japanese text in the file name. |
666 | HyperFlex NX is not correctly applied in complex layout. |
665 | Problems with output when a layout contains pre DigiCapped files and Invert Trim Waste is enabled. |
662 | Cutting table—Despite selecting Layout Setup > Cut file > Don't create, camera marks still appear in the layout and output TIFF file. |
656 | Cutting table—Marks file with _NOCUT or _NC at the end of the file name causes incorrect cuts. |
652 | Files output from TAP with Dot Enlargement cannot be added back to a layout. |
558 | DigiCap Edge Definition is not being applied to one of the perimeter edges of a file. |
556 | Cutting table—Cut mask fails to be applied when text marks or labels are used. |
500 | Auto Arrange should not ungroup elements that are grouped. |
468 | Using Autofit on a certain file causes image area (a microdot) to get cropped off the bottom of the file. |
434 | Some pixels are missing at the edge of the image when a layout is output with 270 degrees rotation. |
371 | Auto Arrange fails to respect the setting Preferences > Layout > Do not allow overlap of elements for marks. |
215 | Cutting table—Some separations disappear from the layout when using Auto-Arrange with separations that have mask applied. |