Overview
Why you should complete this activity
Center 1-up artwork lets you place 1-up artwork in a layout based on the center of the media box. The center of the media box is then matched to the center of the 1-up artwork position in the layout. Artwork will always be centered properly.
Without this feature, you must manually set a trim box for any artwork with different media sizes.
Prerequisite: Artwork must be centered in the media box.
Audience
Operators or anyone who will use the Prinergy Workflow Packaging Automation Expansion Pack together with the Kodak Pandora packaging layout software regularly
Time required
Approximately 30 minutes
Recommended reading
- Prinergy Powerpack Workflow 7.5 Workshop User Guide search key words: Using Artwork Sets and Layouts, Centering 1-Up Artworks
What you'll need
For this activity you need to locate
Packaging Activity Source Files/Center Page/Carton_Green_Cntr.epsPackaging Activity Source Files/Center Page/BigRed.PDFPackaging Activity Source Files/Center Page/RTS3733.CF2
Activity specifications
If you are confident that you can complete the activity on your own, view the following naming conventions and required process template settings.
Naming convention
- Job name: XX_Center (where XX represents your initials)
Process templates
- Refine: 1st Ref-Normz; 2ndRef-MapColors Trap
- Virtual proof: Virtual Proof.Imposed.600
Important: If using the translated Pandora software version in French, Spanish, or German, remember to use a comma (,) for fractional measurements instead of a period (.). For example, English = 456.7 French/Spanish/German = 456,7.