This process template section identifies the format and compression settings of the output files during final output.
Include Images as
If printing to PDF, select Original to output the original images in the output file.
Select Low Resolution to output low-resolution versions of the images in the output file.
Compression
(See About outputting to a file)
The compression options that are available vary depending on the output format selected in the Output To list at the top of the process template. The following compression options are available:
- None—select if you do not want to compress files
- CCITTG3—not available if outputting to a non-screened format
- CCITTG4—not available if outputting to a non-screened format
- LZW
- RLE
- ZIP—select if you use Kodak Staccato screening software
Note: Compression methods CCITTG3 and CCITTG4 are unavailable if the Always use Color Combiner to Convert Spots check box is selected in the Render section of the process template or if any Staccato screening system is selected in the Screen System box in the Calibration & Screening section.
Quality
The quality control option is available only if the Output To list is set to JPEG.
Prinergy provides five JPEG compression quality options ranging from Maximum quality (the least compression and the smallest loss of data) to Minimum quality (the most compression and the greatest loss of data).
- Maximum
- High
- Medium
- Low
- Minimum
The lower the quality of JPEG compression, the smaller the file size, but the greater the chance of noticeable blockiness in certain areas of the image. You should experiment with JPEG compression levels to see what amount of image degradation is acceptable for your purposes.
Advanced TIFF Tags
(See About advanced TIFF tags)
Select to add advanced TIFF tags to output files.
Note: Unless you are outputting to Virtual Proofing System 2.0 or Copydot Toolkit software, this option is not recommended because some devices that do not recognize advanced TIFF tags may reject the entire file.
Available when a TIFF or Virtual Proofing System format is selected in the Output To list at the top of the process template.
Use Custom TIFF Title Tag
Select the check box and type a custom name in the box to create custom title tags in the TIFF file. This feature replaces the need to manually edit the TIFF file.
Use this feature when sending Virtual Proofing System files through Digital Blueline to merge separations from different signatures.
Note: In the box, you can include variables such as %job% and %signature%.
DCS File Format
Select Single File to generate one pre-separated DCS file—that is, one file that contains all the pre-separated colors. The file name will be, for example: <PDF filename>.p00n.eps.
Select Multiple Files to generate a DCS file set—that is, one file for each color separation, plus a master file for the set. The file names will be, for example:<PDF filename>.p00n.dcs.eps<PDF filename>.p00n.C.eps<PDF filename>.p00n.M.eps<PDF filename>.p00n.Y.eps<PDF filename>.p00n.K.eps<PDF filename>.p00n.1.eps
Available when DCS is selected in the Output To list at the top of the process template.
EPS Data
Select the encoding method to use for EPS data.
Available when EPS Raster is selected in the Output To list at the top of the process template.
DCS Data
Select the encoding method to be used for DCS output.
Available when DCS is selected in the Output To list at the top of the process template.
EPS Compression
Select the compression method to use for EPS output, or None if you do not want to compress EPS files.
Available when EPS Raster is selected in the Output To list at the top of the process template.
DCS Compression
Select the compression method to be used for DCS output, or select None if you do not want to compress the DCS file.
Available when DCS is selected in the Output To list at the top of the process template.
Add TIFF Preview to DCS Master File
Select to add a preview file to the master file for a DCS-2 multiple file set. You can view the preview file in software such as Preps and QuarkXPress.
Specify a resolution for the preview file in the at Resolution box.
Available in the Loose Page Output and Imposition Output process templates when EPS vector or DCS (raster or vector) is selected in the Output To list.
Available in the Final Output process template when DCS raster is selected in the Output To list.
Always use custom Large TIFF format
This check box is available only when the file output type is set to TIFF. By default, this option is disabled.
Select this check box to create a JDF file that links multiple large TIFF files (less than 4 GB). This set of files represents a single plate.
Document Format
Select Multi Page to generate one output file for the entire range of selected surfaces or Single Page to generate one file for each surface.
Available in the Loose Page Output and Imposition Output process templates when a vector output (except DCS) is selected in the Output To list.
Available in the Final Output process template when PS3 (PostScriptOut) is selected in the Output To list.
Single Page is not recommended for digital printers.
Vector Output Options
Output Format
Select Composite or Separated output. The selection determines whether or not conversion is required based on the input file format.
Select Automatic to generate files in the same format (composite or separated) as the input files.
Notes:
- Separated PDF/X-1a:2001 and composite DCS-2 are not supported.
- Spot color handling (omission, mapping, and converting) in the Color Separations dialog box is not supported for composite vector output.
- The Automatic option is available when vector output (except DCS) is selected from the Output To list at the top of the process template.
Render Shadings
Select to render PostScript 3 vector objects with Level 3 smooth shades to produce rasterized contone objects in order to meet the PostScript Level 2 standard. Target workflows may process rasterized objects faster than vector ones, but there may be some quality degradation for subtle shadings that extend over long distances.
Specify a resolution for the rendered shadings in the at Resolution box.
Available when DCS, PS2, PS3, or PDF is selected in the Output To list.
Font Outlining
Select to replace all text objects with vector objects in output pages.
This is available to DCS, PDF, and separated PostScript vector output formats. It is useful for eliminating font formats that certain RIPs may not be able to process. Text output in this way cannot be edited and when previewed in Adobe Acrobat, will look bolder than the original text due to loss of font hinting for low-resolution monitors.
Delete Traps
Select to remove any Prinergy-generated traps from PDF, PostScript Level 2, and DCS-2 output files.
Trapping-generated overprints remain in the files.
Simulate overprints (CMYK only)
Select to replace overprint intersections with an opaque object.
This creates a page that maintains its integrity on output, even if a downstream publisher or printer configures their workflow to override overprints.
Send PostScript duplexing commands
Select to print on both sides of the media. Assuming a portrait sheet orientation, select Turn print pages side to side by flipping on the long edge. Select Tumble to print both sides by flipping on the short edge.
This option simply adds the duplex command to the PostScript output. The consuming device may not support this command.
Output Intent
Use this area to specify an ICC profile or named print condition in the Output Intents section of the PDF/X file that you are generating.
A named print condition is a documented printing situation with a defined relationship between input data and the colorimetry of the printed image. Typically, named print conditions are registered with an organization such as the ICC.
Perform one of the following actions:
- To specify an ICC profile, select the Profile check box, and specify the path of a profile.
- To specify a named print condition, select the Name check box, and select a print condition from the list.
- To use the ICC profile specified in the ColorConvert section for PDF/X generation, click the Use ColorConvert Destination profile check box.
Note: The Match Colors in Page Content check box in the ColorConvert section must be selected.
This area is available only when a PDF/X format is selected in the Output To list at the top of the process template.