An i1iO scanning table equipped with an i1Pro handheld spectrophotometer may be used for the automated measuring of color charts.
Requirements: Install the i1Pro and the latest compatible driver software before installing the i1iO scanning table.
1. Place the i1iO scanning table on a flat surface close to the computer running the Proofer Client software.
2. Ensure the scanning table is flat. If necessary, shim the feet under the scanning table to level it.
3. Insert the i1 spectrophotometer into the arm of the scanning table, and set the height of the head from the electrostatic mat.
Set the height at the lowest point of the scanning table. The i1Pro head should lightly touch at all points.
4. Plug the power cord into the power source and into the scanning table.
5. Plug the USB cable into the scanning table and into the computer running the Proofer Client software. Do not plug the USB cable into a USB hub or keyboard.
This duo forms the automated spectrophotometer for measuring color charts.
Note: The i1 spectrophotometer and the scanning table share the USB cable. To manually measure a color, plug the USB cable into the i1. To collect color chart measurements, plug the USB cable into the scanning table.