Sheet/Roll
Specifies whether Roll or Sheet media are used.
For roll media, use Length and Width to specify sheet size, and then use Cut media and Use sheet length to specify when to cut the roll media.
For sheet media, use Height and Width to specify sheet size.
Length/Height
For sheet media, specifies the height of the sheet.
For roll media, specifies the length that you want to cut media. If you select Cut media, the roll is cut at the end of the image.
Width
Specifies the width of the media that you are using.
Cut media and Use sheet length
Available only when you select Roll.
When you clear the Cut media check box, you must use the proofer front panel to cut the media.
When you select both the Cut media check box and the Use sheet length check box, the media is cut at the sheet size specified in the Length box.
When you select the Cut media check box and clear the Use sheet length check box, the media is cut at the end of the image and not at the specified Length. This uses less media.
When you select the Use sheet length check box and clear the Cut Media check box, the software does not cut the media. The software scrolls the media to the specified Length before printing the next proof. You must use the proofer front panel to cut the media.
When you clear the Cut Media check box and the Use sheet length check box, the software does not cut the media. Proofs are printed one after another until you use the proofer front panel to cut the media.
Hold in Proofer Queue
Pauses a sheet submitted using this layout in the Proofer queue in Proofer Viewer, until you release the sheet
Hold in Processor Queue
Holds a sheet submitted using this layout in the Processor queue in Proofer Viewer, until you release the sheet
Print Mirror Image
Flips the image vertically along the left margin to let the proofer print a mirrored image on the media. The mirrored image maintains the left margin specified in the layout, and the mirrored image includes the caption, if used. You cannot print a mirror image for double-sided layouts.
Note: When you use the Epson Stylus Pro WT7900 in reverse print mode, Kodak Proofing Software automatically mirrors the image because the software assumes that you will view a right-reading proof through clear media. The software needs to print a mirrored image to let you view an image that reads from left to right when you view the proof through the media.
When you use the Epson Stylus Pro WT7900 printer to print in reverse print mode, clear the Print Mirror Image check box to view a right-reading proof through clear media. When you use the Epson Stylus Pro WT7900 printer to print in reverse mode, and you select the Print Mirror Image check box, Kodak Proofing Software automatically mirrors the image (for reverse printing mode), and then mirrors the image again (for the layout setting). As a result, the printed image is not mirrored.