General options
1 per position
Specifies one mark per Proof or per Sheet
Position
Specifies the position of the Mark—Automatic Top, Bottom, Left, or Right
0,0 of Top and Left | |
 | |
0,0 of Bottom | 0,0 of Right |
Use offsets
Specifies whether to use offsets for each Mark. If Use offsets is selected, the offset length for the X and Y axis must be specified.
If some marks use automatic positions and some use offsets, marks using offsets are placed first, and then marks using automatic positions are placed.
Offsets are calculated from the same origin (Top Bottom, Left, or Right) for every mark; therefore you must add the Size of each mark into your offsets. If your offsets are too small for the mark, they might overlap.
0,0 of Top and Left | |
| |
0,0 of Bottom | 0,0 of Right |
When you use offsets, the software uses your offsets and does not calculate the size of marks to avoid overlapping.
Positive numbers move the mark away from the image and into the cell. Negative numbers move the mark into the image and away from the cell. Be careful your marks do not overlap or print on the image.
The sizes of the marks are based on the spectrophotometer used in the latest calibration. If you change spectrophotometers after the layout is designed and cause the sizes to change, you must adjust the offsets.
Size
Displays the size of each mark. The sizes are for your reference and cannot be changed.
Offsets are calculated from the same origin (top, bottom, left, or right) for every mark; therefore you must add the size of each mark into your offsets. If your offsets are too small for the mark, they might overlap.
When you use offsets, the software uses your offsets and does not calculate the size of marks to avoid overlapping.
The sizes of the marks are based on the spectrophotometer used in the latest calibration. If you change spectrophotometers after the layout is designed and cause the sizes to change, you must adjust the offsets.
Marks relative to options
Cell
Available for Grid only. Specifies that the mark should be placed relative to the cell in a multi-image proof.
Proof
Available for Grid only. Specifies that the mark should be placed relative to each proof in a multi-image proof.