The following are the mechanical specifications for the color bar artwork for the X-Rite DTP70 spectrophotometer. Use vertical black and white patch alignment marks. Do not use solid black vertical or solid black horizontal alignment marks. For more information about mechanical specifications, see the documentation that is provided with your spectrophotometer.
| 1 | Left margin (called First Patch Left Edge in Kodak Proofing Software) |
| 2 | Columns |
| 3 | Top margin (called First Patch Top Edge in Kodak Proofing Software) |
| 4 | Right margin |
| 5 | Gap height |
| 6 | Bottom margin |
| 7 | Gap width |
| 8 | Patch width |
| 9 | Patch height |
| 10 | Chart width |
| 11 | Chart height |
| 12 | Rows |
Note: Before you can feed the chart of the color bar into the DTP70 spectrophotometer, you must cut the chart from the proof. For the best measurement results, center the chart in the spectrophotometer.
| Area | Dimension | Minimum | Maximum |
|---|---|---|---|
| Chart | Width | 88.9 mm (3.5 in.) | 225 mm (8.86 in.) |
| Height | 139.7 mm (5.5 in) | 381 mm (15 in.) | |
| Height (Fast Scan) | 320 mm (12.6 in.) | ||
| Patch surrounding | Top margin | 32 mm (1.25 in.) | |
| Left margin (includes the width of the alignment mark) | 13.5 mm (0.53 in.) | ||
| Bottom margin | 7 mm (0.27 in.) | ||
| Right margin (includes the width of the alignment mark) | 13.5 mm (0.53 in.) | ||
| Patches | Height | 7 mm (0.27 in.) | |
| Width | 7 mm (0.27 in.) | ||
| Height (Fast Scan) | 10 mm (0.40 in.) | ||
| Width (Fast Scan) | 10 mm (0.40 in.) | ||
| Gap between rows | 0 mm | ||
| Gap between columns | 0 mm | ||
| Patch alignment marks | Height | Same as patch height | |
| Width | Same as patch width |