Adding proofers to Prinergy Administrator

Before you can use a proofer, you must add it to Prinergy Administrator.

Prinergy detects all of the Matchprint Inkjet proofers on the network. When you have successfully added a proofer, it appears in the Process Template Editor in Prinergy Workshop.

1. In Prinergy Administrator, from the Tools menu, select Configure System.
2. In the Configuration Options dialog box, click the Kodak Proofers tab.
3. Click Add.
4. Either select a Proofer Controller in the list or type a Proofer Controller name.
   For example, type <ProoferControllerName>/<ProoferName> or the IP address. Sometimes a proofer fails to appear when the proofer is in a different subnet than Prinergy Administrator.
   Note: When typing the name of a proofer, ensure that you type its IP address and/or name correctly. Otherwise, the proofer will not appear in the Process Template Editor.
5. Click OK.
6. Click OK.
7. When you receive the warning You must restart system on all servers for the change to take effect, you can stop and restart all Proof JTPs rather than take down the entire Prinergy system.