Page tree

    Requirements:

    • The media type must be set in Proofer Viewer for the device.

    • Always allow media to acclimate for 48 hours in the printing area before opening.
    • Ensure the paper is straight when you load it. If the paper is not straight at the loading process, you cannot straighten it later on.

    Kodak roll media comes with a 2-inch or 3-inch cardboard core. Perform the following actions:

    • If needed, attach the core adapters that came with your Epson proofer to the spool caps.
    • Ensure the spool caps are tight against the ends of the roll media. The media should roll off the spool from the top.
    • Ensure the media has no bent corners or damaged edges.


    For instructions on loading roll and sheet media, refer to the Media Handling section of the Epson SureColor P6000/P7000/P8000/P9000 User's Guide.
    PDF


    • No labels