Page tree
Skip to end of metadata
Go to start of metadata

Do the following:

  • To evaluate tint values through the DeviceLink:
    1. In the Input Tints panel, select the Tint Value Range of input tint values you wish to evaluate.
    2. Double-click in the first cell of the Input Tints table.
    3. Type a Cyan input tint value, or a Red input tint value for an RGB-input DeviceLink.
    4. <tab> to advance and enter a Magenta (or Green) input tint value. 
    5. Repeat for other input tint values.
    6. Repeat to enter another set of input tint values.
    7. Terminate input tint entry with <enter>.
    8. In the Output Tints panel:
      • select the desired Tint Value Range of evaluated output tint values.
      • enter the desired Tint Precision of evaluated output tint values.
    9. Click Evaluate below the Input Tints table.
  • To copy, paste and evaluate multiple input tints:
    1. Select an array of input values in a spreadsheet or tab-delimited text file.
    2. Copy.
    3. Click in the ColorFlow Evaluate Input Tints table.
    4. Select all.
    5. Paste.
    6. Click Evaluate.
  • To copy output tints for use by another application:
    1. Click in the Output Tints table.
    2. Select all.
    3. Copy.
  • To combine the above two operations:
    1. Select an array of input values in a spreadsheet or tab-delimited text file.
    2. Copy.
    3. In ColorFlow Evaluate, click Paste - Evaluate - Copy.
  • No labels