Evaluating an SCO conversion DeviceLink

You can evaluate input tints through an SCO conversion DeviceLink.

1. In the color setup viewer, click the Conversion icon  between the PCO and the SCO.
2. From the Output Version list, select the version for which you want to evaluate the DeviceLink.
3. If both the Curve and the DeviceLink tabs are displayed, click the DeviceLink tab.
4. Click Evaluate.
5. Do the following:
   • To evaluate tint values through the DeviceLink:
     1. In the Input Tints panel, select the Tint Value Range of input tint values you wish to evaluate.
     2. Double-click in the first cell of the Input Tints table.
     3. Type a Cyan input tint value, or a Red input tint value for an RGB-input DeviceLink.
     4. <tab> to advance and enter a Magenta (or Green) input tint value. 
     5. Repeat for other input tint values.
     6. Repeat to enter another set of input tint values.
     7. Terminate input tint entry with <enter>.
     8. In the Output Tints panel:
        • select the desired Tint Value Range of evaluated output tint values.
        • enter the desired Tint Precision of evaluated output tint values.
     9. Click Evaluate below the Input Tints table.
   • To copy, paste and evaluate multiple input tints:
     1. Select an array of input values in a spreadsheet or tab-delimited text file.
     2. Copy.
     3. Click in the ColorFlow Evaluate Input Tints table.
     4. Select all.
     5. Paste.
     6. Click Evaluate.
   • To copy output tints for use by another application:
     1. Click in the Output Tints table.
     2. Select all.
     3. Copy.
   • To combine the above two operations:
     1. Select an array of input values in a spreadsheet or tab-delimited text file.
     2. Copy.
     3. In ColorFlow Evaluate, click Paste - Evaluate - Copy.
6. Click Close.
7. Click Cancel.