Evaluating a simulation DeviceLink

You can evaluate input tints through the simulation DeviceLink.

1. In the color setup viewer, click the Simulation icon .
2. If both the Curve and the DeviceLink tabs are displayed, click the DeviceLink tab.
3. Click Evaluate.
4. Do the following:
   • To evaluate tint values through the DeviceLink:
     1. In the Input Tints panel, select the Tint Value Range of input tint values you wish to evaluate.
     2. Double-click in the first cell of the Input Tints table.
     3. Type a Cyan input tint value, or a Red input tint value for an RGB-input DeviceLink.
     4. <tab> to advance and enter a Magenta (or Green) input tint value. 
     5. Repeat for other input tint values.
     6. Repeat to enter another set of input tint values.
     7. Terminate input tint entry with <enter>.
     8. In the Output Tints panel:
        • select the desired Tint Value Range of evaluated output tint values.
        • enter the desired Tint Precision of evaluated output tint values.
     9. Click Evaluate below the Input Tints table.
   • To copy, paste and evaluate multiple input tints:
     1. Select an array of input values in a spreadsheet or tab-delimited text file.
     2. Copy.
     3. Click in the ColorFlow Evaluate Input Tints table.
     4. Select all.
     5. Paste.
     6. Click Evaluate.
   • To copy output tints for use by another application:
     1. Click in the Output Tints table.
     2. Select all.
     3. Copy.
   • To combine the above two operations:
     1. Select an array of input values in a spreadsheet or tab-delimited text file.
     2. Copy.
     3. In ColorFlow Evaluate, click Paste - Evaluate - Copy.
5. Click Close.
6. Click Cancel.