1. In Job Manager, from the File menu, select Create New Layout.
  2. In the Layout Name: Type Layout Not Centered.
  3. In the Select a layout application list, select Pandora.
  4. In the Import Layout Using Process Template, click Select. Locate your Import group ( XX_Group) and select the newly created Not Centered process template. Click OK.
  5. Return to the New Layout dialog box, click OK.
    Pandora starts automatically.

  6. On the ShopMap palette, select the following material entries, and drag them to the Pandora job:

    Substrate (Press Sheet):

    Board 28x40

    Plate Size:

    Sonora 32x44

    Press:

    Press 1

  7. From the File menu in Pandora, select Import > Die.
  8. Select and import the die file: Packaging Activity Sources Files > Center Page > RTS3733.CF2.
  9. From the Window menu, select the Show Geometry Palette (if it is not already open). With the die selected, type 1" (25.4 mm) to adjust the Y coordinate of the die. This action will position the die correctly on the substrate (press sheet).
  10. With the die selected, drag the artwork Carton_Green_Cntr.p1.pdf to the die.
  11. From the File menu, select Save.
  12. Quit Pandora.