1. Click the Materials button, and then click the Press tab.
2. Click the Arrow list on the upper right corner of the palette.
3. Select New and enter the following:
   • Name: Press 1
   • Units: inches/mm
   • Setback: 1"/ 25.4 mm
   • Gripper: 0.75"/ 19.1 mm
   • Plate Bend: 1"/ 25.4 mm
   • First Knife: 0
4. Click Create.
5. Select New.
   • Name: Press 2
   • Units: inches/mm
   • Setback: 0.625"/ 15.9 mm
   • Gripper: 0.5"/ 12.7 mm
   • Plate Bend: 0.625"/ 15.9 mm
   • First Knife: 1
6. Click Create.
7. Select New.
   • Name: Press 3
   • Units: inches/mm
   • Setback: 0.75"/ 19.1 mm
   • Gripper: 1.5"/ 38.1 mm
   • Plate Bend: 0.75"/ 19.1 mm
   • First Knife: 1.5
8. Click Create.
9. From the Pandora software menu (Mac computer), select Quit Pandora to exit the Pandora software.