1. Click Materials, and then click the Substrate (Press Sheet) tab.
2. Click the Arrow list on the upper right corner of the palette.
3. Select New, then enter the following:
   1. Name: Board 25x38
      Note: If you do not provide a name, Pandora will automatically assign a name based on the size of the material.
   2. Units: inches/mm
   3. Height: 25"/ 635 mm
   4. Width: 38"/ 965.2 mm
   5. Grain: No Grain
   6. Click Create
   7. Repeat the same steps for the following substrate (press sheet) setups:
4. Select New:
   1. Name: Board 28x40
   2. Height: 28"/ 711.2 mm
   3. Width: 40"/ 1016 mm
   4. Grain: No Grain
   5. Click Create
5. Select New:
   1. Name: Paper 23x29
   2. Height: 23"/ 584.2 mm
   3. Width: 29"/ 736.6 mm
   4. Grain: No Grain
   5. Click Create
6. Select New:
   1. Name: Foil 19x25
   2. Height: 19"/ 482.6 mm
   3. Width: 25"/ 635 mm
   4. Grain: No Grain
   5. Click Create