The Zund Cut Center software requires the following workaround for using ACM cutting files generated in VPS+

1. Open the ACM file in the Zund software.
   The file displays the following layers: 
   • Register—camera marks
   • Tool 1—labels
   • Tool 2—cut lines
2. In the Tool 1 layer, set the cut method to Draw, for drawing the label.
3. In the Tool 2 layer, set the cut method to Thru-cut, for cutting the plate.
   The following layers should now be displayed:
   • Register layer
   • Draw layer
   • Thru-cut layer

You can now label and cut the plate on the Zund cutting table.