You can generate a PDF Verification report to verify the following:
If the calibrated color response of a print calibration curve, a PCO, or an SCO matches either the target response or the predicted response.
If the predicted response of a print calibration curve, a PCO, or an SCO using the curve or the DeviceLink method you have chosen matches the color response of the simulation or the conversion target.
Create Verification reports to check if the color response of a print calibration curve matches the target. In this activity, you will create two reports: the first report compares the predicted response to the target response; the second report compares the measured color response to the target response.
This activity assumes that you have already created a print calibration curve XX new print calibration curve for gray balance in a previous activity .
XX verification report to verify predicted response(where xx is your initials).
XX verification report to verify calibrated color response(where xx is your initials).
You have generated two Verification reports to verify if the predicted color response and the measured color response match the target.