Overview
Why you should complete this activity
To output files from Prinergy to a platesetter, you need to create a process template so that you can render the files using a high-resolution job ticket processor (JTP) and image separations onto the selected media (plate/film/flexo).
For Kodak ThermoFlex output devices, however, direct workflow with Prinergy and Print Console (GDAPI) is not applicable. Instead, you need to use the indirect 1-Bit TIFF workflow (using TIFF Downloader). Consult your Kodak representative if you are not sure on your workflow-output device connectivity.
In this activity, you will output 1-Bit TIFF files to a designated subfolder of your job.
Audience
- Prepress operators
- System administrators
Time required
Approximately 15-20 minutes
Recommended reading
- Prinergy Powerpack Workflow 7.5 Workshop User Guide
- Kodak Prinergy Release Notes
What you'll need
For this activity you need to locate
Packaging Activity Source Files / Vitamin Carton / Vitamin.eps
Packaging Activity Source Files / Vitamin Carton / Vitamin.jt
Activity specifications
If you are confident that you can complete the activity on your own, view the following naming conventions and required process template settings.
Naming convention
- Job name: XX_Print_Console (where XX represents your initials)
Process templates
- Refine process: 1stRef-Normz; 2ndRef-MapColors Trap
- Virtual proof: Virtual Proof.Imposed.600
- Output: AutoFlatOutput (save as XXFinalOutput, where <XX> represents your initials)