Prinergy servers and workstations must meet specific hardware and software requirements to be supported with this version of Prinergy.
Read the following topics closely and ensure that your system and any connected or integrated components meet or exceed these requirements prior to upgrading. If you have any questions, contact your local Response Center.
Supported servers
Prinergy Workflow 9.0 requires Microsoft Windows Server 2016, or Windows Server 2019 on one of the following Dell platforms:
Windows 2016 or Windows 2019
Generation 13/14 Premium and High-Performance Servers
| Generation 13/14 Premium Servers
| Generation 13/14 Performance Plus Servers
| Generation 13/14 Performance Servers
|
| Supported as primary server, EPM+, secondary server, and render station | Supported as secondary server and render station | ||
Virtual Environments:
Prinergy is supported on the following virtual platforms:
VMWare Vsphere: | Notes |
|---|---|
| 6.0 | Prinergy is tested and will function on vSphere 6.0. However, VMWare has terminated support for this version as of March 12, 2020. While Prinergy will continue function on this platform, Kodak HIGHLY recommends upgrading to a current vSphere release. Note: Prinergy 9.0 images cannot be deployed on vSphere ESXi 6.0. |
| 6.5 and up | Supported. VMWare vSphere ESXi 6.5, 6.7, and 7.0 are recommended in order to continue to receive support from VMWare. |
Hyper-V: | Notes |
|---|---|
| 2016 | Supported |
| 2019 | Supported |
Memory requirements
Prinergy primary servers and Hot Standby servers require a minimum of 12 GB RAM. Prinergy secondary servers and render stations require a minimum of 8 GB RAM.
Storage requirements
Prinergy Workflow 9.0 requires system drives with a minimum of 146 GB storage space (with at least 10 GB free space) on primary servers and system drives with a minimum of 73 GB storage space (with at least 10 GB free space) on secondary servers and render stations.
If upgrading from a version of Prinergy with Oracle 12.2 or earlier integrated, make sure that during the upgrade you have at least 3x the amount of disk space currently occupied by the database (J:\Oracle) available on the drive where the database is installed (default drive J:\Oracle).
Hot Standby (EPM) servers
Prinergy Workflow 9.0 supports Carbonite Double-Take software 8.2 under Windows 2016 and Windows 2019. Double-Take upgrades are performed by a Kodak engineer during the operating system upgrade.