Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


In this activity, you will add a proofer to an existing color setup. In the color setup, the PCO is a press that is aligned to an industry specification. The proofer becomes a Secondary Color Output (SCO). The SCO will be aligned to the PCO using a DeviceLink. With this DeviceLink, the proofs will simulate the color that you print from the offset press.


Add an SCO—an inkjet proofer— to a color setup that you created in a previous activity with a press defined as the PCO.

Task 1: Add an SCO to a color setup that already has a PCO defined

  1. In ColorFlow, in the Color Setups table, select the color setup named GRACoL C1 2006.
  2. In the Devices dialog box, add a new Inkjet proofer device:
    1. Click Add Device.
    2. From the Device Type list, select Inkjet Proofer - Matchprint Inkjet.
    3. Name the device as  Proofer A .
    4. Drag Proofer A to the SCO position in the viewer window.
  3. Click the Properties icon  inside the SCO device condition.
  4. Define new properties for the device condition:
    1. In the Resolution list, add or select 1440x720.
    2. In the Substrate list, add or select SM240.
    3. Click OK.
  5. Click the Measurements icon   to create a new Color Characterization Chart:
    1. In the Charts tab, click the Add button   to create a new chart.
    2. From the Chart Type list, select Color Characterization.
    3. Click Save.
  6. In a real-life situation, you might need to export the chart and output the chart from Prinergy and then measure the chart in ColorFlow. For the purpose of this training, you import a sample data file from your ColorFlow installation folder:
    1. Click the Measurement tab.
    2. Click Import.
    3. In the dialog box appeared, keep the default value and click OK.
    4. Browser and select \Program Files\Kodak\ColorFlow\SampleData\Measurements\MatchprintInkjet.cgt .
    5. Click Open
    6. Click Close.
  7. In the SCO, click the Device condition profile icon   to generate an ICC profile for the device condition.

Task 2: Complete the color setup

  1. Click the Conversion icon .
  2. From the DeviceLink Method drop-down list, select Full Reseparation
  3. From the Rendering Intent drop-down list, select Absolute Colormetric.
  4. Click OK.


You have created a color setup that uses the DeviceLink to align an inkjet device condition with a press aligned to an industry specification. 


  • No labels