Page tree
Skip to end of metadata
Go to start of metadata

The Zund Cut Center software requires the following workaround for using ACM cutting files generated in TIFF Assembler Plus

  1. Open the ACM file in the Zund software.
    The file displays the following layers: 
    • Register—camera marks
    • Tool 1—labels
    • Tool 2—cut lines
  2. In the Tool 1 layer, set the cut method to Draw, for drawing the label.
  3. In the Tool 2 layer, set the cut method to Thru-cut, for cutting the plate.
    The following layers should now be displayed:
    • Register layer
    • Draw layer
    • Thru-cut layer

You can now label and cut the plate on the Zund cutting table.

  • No labels