Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published by Scroll Versions from space COLORFLOW and version 8.3
Sv translation
languageen

For a flexographic press, define the Mindot bump and cutoff curves in the  Mindot Bump / Cutoff  section of the Device Curves Definition  dialog box.

Note:

  • Include Page
    _flexcel nx
    _flexcel nx
  • Include Page
    _lams plates
    _lams plates
  • Include Page
    _hybrid screening
    _hybrid screening
  1. Include Page
    _define Mindot
    _define Mindot
  2. Include Page
    _snap tint in to 8-bit
    _snap tint in to 8-bit
  3. If this device condition contains a device pool, to improve color match of the promoted device, select the Allow Tint Out increase to improve color match check box only if the color response of the promoted device is darker than of this device
  4. Include Page
    _highlight contrast control
    _highlight contrast control
  5. Click OK.
Sv translation
languagezh

对于柔性版印刷机,请设备曲线定义对话框的 Mindot 上调/裁剪 部分定义 Mindot 上调和裁剪曲线

注意

  • Include Page
    _flexcel nx
    _flexcel nx
  • Include Page
    _lams plates
    _lams plates
  • Include Page
    _hybrid screening
    _hybrid screening
  1. Include Page
    _define Mindot
    _define Mindot
  2. Include Page
    _snap tint in to 8-bit
    _snap tint in to 8-bit
  3. 如果设备条件包含设备池,为提高升级设备的颜色匹配,仅当升级设备的颜色响应比此设备更暗时选中允许增大色调输出以提高颜色匹配复选框。
  4. Include Page
    _highlight contrast control
    _highlight contrast control
  5. 单击确定
Sv translation
languagefr

Pour une presse flexographique, définissez les courbes d’accentuation et d’atténuation du Mindot dans la section  Accentuation/atténuation du point minimal  de la boîte de dialogue Définition de courbes de périphérique.

Remarque :

  • Include Page
    _flexcel nx
    _flexcel nx
  • Include Page
    _lams plates
    _lams plates
  • Include Page
    _hybrid screening
    _hybrid screening
  1. Include Page
    _define Mindot
    _define Mindot
  2. Include Page
    _snap tint in to 8-bit
    _snap tint in to 8-bit
  3. Si cette condition de périphérique contient un pool de périphériques, pour améliorer le contretypage des couleurs du périphérique promu, cochez la case Autoriser l’augmentation de la teinte de sortie pour améliorer le contretypage des couleurs uniquement si la réponse couleur du périphérique promu est plus sombre que celle de ce périphérique
  4. Include Page
    _highlight contrast control
    _highlight contrast control
  5. Cliquez sur OK.
Sv translation
languagede

Bei einer Flexo-Druckmaschinen definieren Sie die Mindot-Anhebungs- und Absenkungskurven im Abschnitt Mindestpunkt Spitzlichtanhebung oder -absenkung des Dialogfelds Gerätekurvendefinition .

Hinweis:

  • Include Page
    _flexcel nx
    _flexcel nx
  • Include Page
    _lams plates
    _lams plates
  • Include Page
    _hybrid screening
    _hybrid screening
  1. Include Page
    _define Mindot
    _define Mindot
  2. Include Page
    _snap tint in to 8-bit
    _snap tint in to 8-bit
  3. Wenn dieser Gerätezustand einen Gerätepool enthält, aktivieren Sie zum Verbessern des Tönungsabgleichs des Referenzgeräts das Kontrollkästchen Erhöhung der Färbungsausgabe zur Verbesserung der Farbanpassung zulassen nur dann, wenn das Farbein-/ausgabeverhalten des Referenzgeräts dunkler ist als das Verhalten dieses Geräts.
  4. Include Page
    _highlight contrast control
    _highlight contrast control
  5. Klicken Sie auf OK.
Sv translation
languagees

Para una prensa flexográfica, defina las curvas de recorte y relieve de Mindot en la sección Relieve / Corte de Semipunto del cuadro de diálogo Definición de las curvas del dispositivo.

Nota

  • Include Page
    _flexcel nx
    _flexcel nx
  • Include Page
    _lams plates
    _lams plates
  • Include Page
    _hybrid screening
    _hybrid screening
  1. Include Page
    _define Mindot
    _define Mindot
  2. Include Page
    _snap tint in to 8-bit
    _snap tint in to 8-bit
  3. Si esta condición del dispositivo contiene un grupo de dispositivos, a fin de mejorar la coincidencia de color del dispositivo promocionado, seleccione la casilla de verificación Permitir aumento de salida de matiz para mejorar la coincidencia de color solo si la respuesta de color del dispositivo promocionado es más oscura que la de este dispositivo.
  4. Include Page
    _highlight contrast control
    _highlight contrast control
  5. Haga clic en Aceptar.
Sv translation
languageit

Per una macchina da stampa flessografica, definire le Mindot curve di rilievo e ritaglio nella sezione Rilievo/ritaglio del punto minimo della finestra di dialogo Definizione curve del dispositivo.

Nota:

  • Include Page
    _flexcel nx
    _flexcel nx
  • Include Page
    _lams plates
    _lams plates
  • Include Page
    _hybrid screening
    _hybrid screening
  1. Include Page
    _define Mindot
    _define Mindot
  2. Include Page
    _snap tint in to 8-bit
    _snap tint in to 8-bit
  3. se questa condizione del dispositivo contiene un pool di dispositivi, per migliorare la corrispondenza del colore del dispositivo definito, selezionare la casella di controllo Consenti aumento uscita tinta per migliorare la corrispondenza del colore solo se la risposta colore del dispositivo definito è più scura di questo dispositivo.
  4. Include Page
    _highlight contrast control
    _highlight contrast control
  5. Fare clic su OK.
Sv translation
languageja

フレキソ印刷機では、デバイス カーブ - 設定ダイアログ ボックス最小ドットのバンプ / カットオフ]セクションMindotのバンプとカットオフのカーブを定義します。

注意

  • Include Page
    _flexcel nx
    _flexcel nx
  • Include Page
    _lams plates
    _lams plates
  • Include Page
    _hybrid screening
    _hybrid screening
  1. Include Page
    _define Mindot
    _define Mindot
  2. Include Page
    _snap tint in to 8-bit
    _snap tint in to 8-bit
  3. 割り当てられたデバイスのカラー マッチングを向上させるためにこのデバイス コンディションにデバイス プールが含まれる場合、割り当てられたデバイスのカラー特性がこのデバイスよりも濃いときに、[カラー変換を向上するために出力網パーセントの増加を許可チェック ボックスを選択します 
  4. Include Page
    _highlight contrast control
    _highlight contrast control
  5. OK]をクリックします。