Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published by Scroll Versions from space PRINERGY and version 7.5
Sv translation
languageen

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- This is an example of linear webgrowth which is applied in width(X) and 

height(Y) directions. It excludes 3/4 inch all the way around the image from having web growth applied. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

                

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- This is an example of linear webgrowth which is applied in width(X) and

height(Y) directions. It excludes 3/4 inch all the way around the image from having web growth applied. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

               

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


Sv translation
languagezh

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- 此为应用在宽度 (X) 和 

高度 (Y) 方向的线性轮转机延伸示例。它从图像应用轮转机延伸处排除 3/4 英寸。 -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

                

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- 此为应用在宽度 (X) 和

高度 (Y) 方向的线性轮转机延伸示例。它从图像应用轮转机延伸处排除 3/4 英寸。-->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

               

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


Sv translation
languagede

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- Dies ist ein Beispiel für lineare Papierausdehnung, die in den Richtungen Breite (X) und 

Höhe (Y) erfolgt. Dabei werden etwa 2 cm rund um das Bild von der Papierausdehnung ausgenommen. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

                

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- Dies ist ein Beispiel für lineare Papierausdehnung, die in den Richtungen Breite (X) und

Höhe (Y) erfolgt. Dabei werden etwa 2 cm rund um das Bild von der Papierausdehnung ausgenommen. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

               

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


Sv translation
languagees

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- Este es un ejemplo de dilatación del papel lineal que se aplica en las direcciones de anchura (X) y 

y altura (Y). No incluye 3/4 de pulgada alrededor de la imagen para evitar que se aplique la dilatación del papel. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

                

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- Este es un ejemplo de dilatación del papel lineal que se aplica en las direcciones de anchura (X) y

y altura (Y). No incluye 3/4 de pulgada alrededor de la imagen para evitar que se aplique la dilatación del papel. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

               

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


Sv translation
languagefr

<?xml version="1,0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- Il s'agit d'un exemple d'étirement linéaire de la bande appliqué en largeur(X) et 

en hauteur(Y). Cela évite que l'étirement de la bande soit appliqué sur 1,9 cm tout autour de l'image. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

                

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


<?xml version="1,0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- Il s'agit d'un exemple d'étirement linéaire de la bande appliqué en largeur(X) et

en hauteur(Y). Cela évite que l'étirement de la bande soit appliqué sur 1,9 cm tout autour de l'image. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

               

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


Sv translation
languageit

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!--- Questo è un esempio di espansione della bobina lineare che viene applicato nelle direzioni di larghezza (X) e 

altezza (Y). Esclude l'applicazione dell'espansione bobina per 3/4 di pollice lungo l'intero perimetro dell'immagine. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

                

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!--- Questo è un esempio di espansione della bobina lineare che viene applicato nelle direzioni di larghezza (X) e

altezza (Y). Esclude l'applicazione dell'espansione bobina per 3/4 di pollice lungo l'intero perimetro dell'immagine. -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

               

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


Sv translation
languageja

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- これは、幅(X)と 

高さ(Y)方向に適用されるリニア見当加減の例です。画像の周囲から 3/4 インチ内側まで見当加減が適用されないようになります。 -->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

                

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE profile SYSTEM "WebGrowthProfile.dtd">

<profile>

<!-- これは、幅(X)と

高さ(Y)方向に適用されるリニア見当加減の例です。画像の周囲から 3/4 インチ内側まで見当加減が適用されないようになります。-->

 

                <excludeMargin topEdge="0.75" bottomEdge="0.75" leftEdge="0.75" rightEdge="0.75" unit="inch" />

 

                <plate tower="1" side="U" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="U" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="U" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="U" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

               

                <plate tower="1" side="L" >

                                <expansion xpercent="0.80" ypercent="0.30" />

                </plate>

                <plate tower="2" side="L" >

                                <expansion xpercent="0.50" ypercent="0.20" />

                </plate>

                <plate tower="3" side="L" >

                                <expansion xpercent="0.20" ypercent="0.10" />

                </plate>

                <plate tower="4" side="L" >

                                <expansion xpercent="0" ypercent="0" />

                </plate>

 

</profile>