Overview
This document provides the procedure and links to enable setup and configuration of a Site 2 Site VPN connection from your network to the Azure cloud-hosted Kodak workflow servers. Upon successful completion, all Azure-hosted Kodak workflow servers will interact with your network resources as though they are located within your local network.
Much of the body of the instructions is located on Microsoft Azure web portal documentation pages. This document will direct you to those pages. Kodak products use a standard Azure VPN Gateway. Because those pages are frequently updated by Microsoft, this means the links provided below will ensure that you are always using the latest, correct documentation.
...
| Sv translation | ||
|---|---|---|
|
A Site-to-Site VPN gateway connection is used to connect |
...
your on-premises network to an Azure virtual network over an IPsec/IKE (IKEv1 or IKEv2) VPN tunnel. |
...
Prerequisites
...
You will need to use your Firewall device to configure a Site-To-Site VPN. Please open a support call with Kodak if you need assistance with setting up a site-to-site connection. Instructions for configuring a point to site connection are available on the Partner Place website (partnerplace.kodak.com). Authenticated customers can log in and find the instructions by searching for answer ID 76121. |
| Sv translation | ||
|---|---|---|
| ||
Eine Site-to-Site-VPN-Gateway-Verbindung wird verwendet, um Ihr lokales Netzwerk mit einem virtuellen Azure-Netzwerk über einen IPsec/IKE (IKEv1 oder IKEv2) VPN-Tunnel zu verbinden. Sie müssen Ihr Firewall-Gerät verwenden, um ein Site-To-Site-VPN zu konfigurieren. Wenn Sie Hilfe bei der Einrichtung einer Site-to-Site-Verbindung benötigen, wenden Sie sich bitte an den Kodak Support. Anweisungen zur Konfiguration einer Punkt-zu-Standort-Verbindung finden Sie auf der Partner Place Website (partnerplace.kodak.com). Authentifizierte Kunden können sich anmelden und die Anweisungen finden, indem sie nach der Antwort-ID 76121 suchen. |
| Sv translation | ||
|---|---|---|
| ||
Una conexión de puerta de enlace VPN de sitio a sitio se utiliza para conectar su red local a una red virtual Azure a través de un túnel VPN IPsec/IKE (IKEv1 o IKEv2). Deberá utilizar su dispositivo Firewall para configurar una VPN de sitio a sitio. Por favor, abra una llamada de soporte con Kodak si necesita ayuda para configurar una conexión de sitio a sitio. Las instrucciones para configurar una conexión punto a sitio están disponibles en el sitio web de Partner Place (partnerplace.kodak.com). Los clientes autenticados pueden iniciar sesión y encontrar las instrucciones buscando la respuesta ID 76121. |
| Sv translation | ||
|---|---|---|
| ||
Une connexion de passerelle VPN de site à site est utilisée pour connecter votre réseau sur site à un réseau virtuel Azure via un tunnel VPN IPsec/IKE (IKEv1 ou IKEv2). Vous devrez utiliser votre pare-feu pour configurer un VPN site à site. Veuillez ouvrir un appel d'assistance avec Kodak si vous avez besoin d'aide pour configurer une connexion de site à site. Les instructions relatives à la configuration d'une connexion point à site sont disponibles sur le site Web Partner Place (partnerplace.kodak.com). Les clients authentifiés peuvent se connecter et trouver les instructions en recherchant l'ID de réponse 76121. |
| Sv translation | ||
|---|---|---|
| ||
Una connessione gateway VPN Site-to-Site viene utilizzata per collegare la rete on-premises a una rete virtuale Azure tramite un tunnel VPN IPsec/IKE (IKEv1 o IKEv2). Per configurare una VPN Site-To-Site è necessario utilizzare il dispositivo Firewall. Se avete bisogno di assistenza per configurare una connessione da sito a sito, contattate Kodak. Le istruzioni per la configurazione di una connessione da sito a sito sono disponibili sul sito Web Partner Place (partnerplace.kodak.com). I clienti autenticati possono accedere e trovare le istruzioni cercando l'ID risposta 76121. |
| Sv translation | ||
|---|---|---|
| ||
Site-to-Site VPN ゲートウェイ接続は、IPsec/IKE (IKEv1 または IKEv2) VPN トンネルを介して、オンプレミス ネットワークと Azure 仮想ネットワークを接続するために使用されます。Site-To-Site VPNを構成するには、ファイアウォールデバイスを使用する必要があります。 サイト間接続の設定にサポートが必要な場合は、コダックのサポートコールをご利用ください。 サイト間接続の設定方法は、パートナープレースウェブサイト（partnerplace.kodak.com）でご覧いただけます。認証されたお客様はログインして、回答 ID 76121 を検索して手順を見つけることができます。 |
| Sv translation | ||
|---|---|---|
| ||
Uma conexão de gateway VPN Site-to-Site é usada para conectar sua rede local a uma rede virtual do Azure por meio de um túnel VPN IPsec/IKE (IKEv1 ou IKEv2). Você precisará usar seu dispositivo de firewall para configurar uma VPN Site-To-Site. Abra uma chamada de suporte com a Kodak se precisar de ajuda para configurar uma conexão site a site. As instruções para configuração de uma conexão ponto a ponto estão disponíveis no site Partner Place (partnerplace.kodak.com). Os clientes autenticados podem fazer login e encontrar as instruções pesquisando a ID de resposta 76121. |
| Sv translation | ||
|---|---|---|
| ||
站点到站点 VPN 网关连接用于通过 IPsec/IKE（IKEv1 或 IKEv2）VPN 通道将内部网络连接到 Azure 虚拟网络。您需要使用防火墙设备来配置站点到站点 VPN。 如果您在设置站点到站点连接时需要帮助，请拨打柯达支持电话。 配置点到点连接的说明可在 Partner Place 网站 (partnerplace.kodak.com) 上获取。已验证的客户可登录并通过搜索答案 ID 76121 找到说明。 |
| Sv translation | ||
|---|---|---|
|
...
Parameters you will need
The following parameters are examples and are not necessarily a complete list. You will need to check with your IT group / System Administration team for any additional information that may be specific to your network configuration.
...
Virtual Network (VNet) Name
...
This will be created automatically by the deployment scripts.
...
Address Space
...
x.x.x.x/xx
Usually the Kodak allocated address space on Azure
...
Subscription
...
The subscription you want to use (usually UWS Managed Services)
...
Resource Group
...
Name of Resource Group that your Kodak cloud-hosted servers are located in
...
Location
...
The Azure data store location where your Azure Resource Group is located
...
Subnet
...
FrontEnd: x.x.x.x/27 (block of 32 addresses)
...
Gateway Subnet name
...
GatewaySubnet
This will auto-fill in the portal. DO NOT CHANGE IT
...
Gateway Subnet address range
...
x.x.x.x/27
Must be adjacent to the subnets above
...
DNS Server
...
8.8.8.8
Optional. The IP address of your DNS server. The one shown above is Google’s public DNS, as an example.
...
Virtual Network Gateway Name
...
CustomerVPNGateway
Replace “Customer” with your organization name.
...
Public IP
...
CustomerPublicIP
Replace “Customer” with your organization name.
...
VPN Type
...
Route-based
...
Connection Type
...
Site-to-site (IPsec)
...
Gateway Type
...
VPN
...
Local Network Gateway Name
...
CustomerLocalNetworkGateway
Replace “Customer” with your organization name.
...
Connection Name
...
CustomerVNetToCustomerSite
Replace “Customer” with your organization name.
...
Shared key
...
For the examples in the Microsoft documentation, abc123 is used. But, you can use whatever is compatible with your VPN hardware. The important thing is that the values match on both sides of the connection.
Creating the Site to Site Gateway
The above information is all you need to create the Site2Site VPN Gateway. Please follow the instructions on the Microsoft documentation portal to create the connection. https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-site-to-site-resource-manager-portal
...