...
Sv translation | ||
---|---|---|
| ||
Importante: Es posible que algunas de las opciones descritas en este tema no sean relevantes para Workshop en esta versión del software Prinergy. Todos los valores son de solo lectura y no pueden editarse. Lista Ordenar por Haga clic en la flecha de la derecha del panel central para mostrar la lista de categorías de ordenación. Seleccione la categoría por la que se ordena la lista.
Muestra un nombre para el substrato
Muestra el tipo de sustrato (el material general del que está compuesto), por ejemplo, papel o transparencia
Muestra el tipo de material de sustrato (una descripción más detallada del material que compone el sustrato). Estas son algunas de las opciones compatibles: Cartón, Largo continuo, Corto continuo, Sobre, Sobre sencillo, Sobre con ventanilla, Pestañas totalmente cortadas, Etiquetas, Membrete, Formulario con varias partes, Fotográfico, Pestañas precortadas, Material de escritorio, Stock de pestañas, Tractor, No se requiere carbono y Carpeta de plástico.
Muestra el tipo de procesos en los que puede utilizarse el sustrato
Muestra el tamaño predeterminado de este sustrato
Muestra la dirección del granulado del sustrato
Muestra el nombre del fabricante del sustrato
Muestra el peso del sustrato. El peso se utiliza para calcular el deslizamiento y la proporción de los márgenes.
Muestra el grosor del sustrato
Muestra el revestimiento de la parte frontal del sustrato
Muestra el revestimiento de la parte posterior del sustrato.
Muestra el tamaño de los sustratos
Esta casilla de verificación está seleccionada si el sustrato contiene perforaciones
Muestra el número de pestañas que tiene el sustrato
Muestra la altura de la pestaña, es decir, la distancia en puntos que se extiende la pestaña desde el cuerpo del sustrato
Muestra la anchura de la pestaña, es decir, la distancia en puntos a lo largo de línea central
Muestra el offset de la pestaña, es decir, la distancia en puntos desde la esquina al borde de la primera pestaña. Esta distancia es la misma en los dos extremos de la serie de pestañas.
Muestra el movimiento de la pestaña si existe. Es decir, la distancia de movimiento en puntos del contenido de la hoja completa en la dirección X. Esta opción se usa (valor superior a 0) cuando el texto de la pestaña es parte del archivo imprimido y los datos del archivo imprimido no tienen en cuenta que una pestaña se extiende fuera del cuerpo del medio. El contenido de la hoja completa debe moverse en la dirección X positiva de forma que el texto se imprima en la pestaña.
Muestra Adelante cuando la primera pestaña está hacia la parte superior de la pila o Invertir cuando la primera pestaña está hacia la parte inferior de la pila |
Sv translation | ||
---|---|---|
| ||
Important: Some of the options described in this topic may not be relevant to Workshop in this version of the Prinergy software. All of the settings are read-only and cannot be edited. Sort by list Click the arrow on the right side of the center pane to display the list of sorting categories. Select the category by which to sort the list.
Displays a name for the substrate
Displays the type of the substrate—the general material it is made of—for example, paper, or transparency
Displays the substrate material type—a more detailed description of the material the substrate is made of. Some of the supported options are: Cardboard, ContinuousLong, ContinuousShort, Envelope, EnvelopePlain, EnvelopeWindow, FullCutTabs, Labels, Letterhead, MultiPartForm, Photographic, PreCutTabs, Stationery, TabStock, Tractor, NoCarbonRequired, and PlasticFolder.
Displays the type of processes that the substrate can be used in
Displays the default size of this substrate
Displays the grain direction of the substrate
Displays the name of the manufacturer of the substrate
Displays the weight of the substrate. The weight is used for calculating creep and shingling.
Displays the thickness of the substrate
Displays the coating for the front of the substrate
Displays the coating for the back of the substrate.
Displays the color of the substrate
This check box is selected if the substrate has punched holes in it
Displays the number of tabs that this substrate has
Displays the height of the tab, that is, the distance, in points, that the tab extends beyond the body of the substrate
Displays the width of the tab, that is, the width of the tab, in points, along the mid-line
Displays the offset of the tab, that is, the distance, in points, from the corner to the edge of the first tab. This distance is the same on both ends of the series of tabs.
Displays the shift of the tab, if exists, that is, the amount to shift, in points, the entire sheet content in the x-direction. This option is used (value more than zero) when the tab text is part of the print file and the print file data does not take into consideration that a tab extends beyond the body of the media. The entire sheet content must be shifted in the positive x-direction, so that the text will be printed on the tab.
Displays Forward when the first tab is toward the top of the stack or Reverse when the first tab is toward the bottom of the stack |