Page History

...

• Supported Epson Stylus Pro Series and SureColor PSeries printer and inline spectrophotometer equipped with either the SpectroProofer ILS (with UV-cut filter or unfiltered) or ILS30 (Mx) head

Terminology note: Unless otherwise specified, the term inline spectrophotomoter spectrophotometer refers to the first-generation ILS (ILS20) and the second-generation ILS30. Important: Replacing an ILS with an ILS30 also requires a printer firmware upgrade.

...

• The terms i1, i1Pro, i1Pro 2, i1Pro 3 and Eye-One are generally interchangeable.
• The term i1iO includes the inserted i1 and can mean either a first-  second- third generation (“2” and "3") model.
• The term offline distinguishes portable spectrophotometers from inline spectrophotometers installed in some proofers.

Spectrophotometers for the Epson WT7900 printer and white ink

To avoid damaging white ink on proofs, use only a spectrophotometer supported for use with the Epson Stylus Pro WT7900 printer and white ink.

...

Supported devices

...

Devices not supported

●     X-Rite i1Pro 2, and i1Pro 3

●     X-Rite i1iO2, and i1iO3 automated scanning table

...

●     Inline SpectroProofer (ILS, ILS30)

●     X-Rite i1iSis and i1iSis XL automated chart readers

●     X-Rite DTP 70

Note: When you use the Epson Stylus Pro WT7900 without white ink, you can use any of the spectrophotometers supported for Matchprint Inkjet printers.

Be extra careful when you measure white ink printed by surface mode on media. In this case you measure the ink on media, and it is easy to scratch the white ink with the spectrophotometer.

...

• .

...

Spectrophotometer combinations in selection lists

...