Decimal precision
Defines the number of digits after the decimal point (0-6) for values that contain a decimal point.
Comparison tolerance
This setting controls the display of differences between two compared files. The lower the tolerance, the greater the number of differences that the software displays.
Small Scum dot size...(X) to (Y) pixels
These settings allow you to select and delete small pixel clusters that could result in flexo dots too small to print well, and which could result in scum dot on the press. You can clear out all pixel clusters below a certain size by specifying 0
for the first number and the desired minimum pixel cluster for the second number. For example, setting 0
and 9
would result in all pixel clusters of 8 or fewer pixels being selected for removal.
...
Scum Dot selection and deletion is available only in Proof Mode. It is not available in Layout Mode.
Min Dot size
Defines the halftone dot size, in pixels, that will be added to a selected area when the Edit: Fill with Min Dot command is used.
Show low-resolution image when zoom level is x % or less
Defines the starting zoom level for displaying the actual one-bit data, rather than a quick contone preview.
Compression type of generated TIFF file
Select LZW, Packbits, or G4.
Number of simultaneously running processes
The number of options (processes) here depends on the number of CPUs in your computer. For example, if you have two CPUs, then your choices are 1 or 2 processes.
CF2 file measurement units
Select Inches or Millimeters for CF2 format cutting and mounting files.
Hot folder wait time for next separation
This feature is useful for slow network environments. If you find that hot folders are regularly being activated before all desired files have arrived in the folder, you can increase the number of seconds a hot folder will wait before triggering after any file is dropped in the hot folder. The default wait time is 10 seconds.
Show advanced information in the File Information dialog box
Select this check box if you want the file Information dialog box to show advanced information such as bits per sample, samples per pixel, raster type, and ink coverage.
Include margins with Invert Trim Waste
Select this checkbox if you would like to apply Invert Trim Waste to all unused areas of the layout, including the margin area.
Zoom with scroll wheel
Select this check box if you want to enable zooming in and out with the scroll wheel.
Create media usage report
Select this check box if you want to create a report that details the number of square millimeters or inches of media used on each output. The media usage report is created each time a layout is output.
...