...
| language | en |
|---|
The settings on the Substrate tab determine how the software creates automatically sized substrates (formerly: automatically sized press sheets or ASPS).
Note: In PLA 4.0 and later, the word "substrate" replaces "press sheet". This enhancement delivers naming that is better aligned with the overall packaging market and is suitable for all of its segments.
The PLA software can automatically size substrates according to the job elements (die, step-and-repeat, plate, or film) and margins that you specify. For example, you may receive a die from a die maker, and want to reduce paper waste by using the size of the die to determine the size of the substrate. You can create default settings and have PLA always create substrates based on these settings.
Preferences set on the Substrate tab are user-specific. You can define them in the PLA Client.
Size To None
Select millimeters, centimeters, or inches.
Size To Die
- Select millimeters, centimeters, or inches.
- To prevent an odd-sized substrate, select the Round to nearest check box, type a number in the box, and, in the rounding box, select Up or Down.
Note: It is not possible to round down unless the margins are big enough to prevent a negative margin value. - Select Size Based On as appropriate:
- All lines in die file bases the die size on the outermost lines in the die.
- All die stations bases the die size on all the stations in the die.
- Line type allows you to specify a line type to use to size the die.
Size to Step Repeat, Size to Plate, Size to Film
In the same way that you configured Size to Die, you can select to set units to size to step-and-repeats, plates, or film
...
| language | zh |
|---|
...
.
...
PLA 软件可以根据作业元素（刀版、多重拼贴、印版或胶片）以及您指定的页边空白自动调节承印物尺寸。 例如，您可能从刀版工那里接收到一个刀版，并且希望通过使用该刀版大小来确定承印物的尺寸，从而减少纸张浪费。 您可以创建默认设置，并让 PLA 软件始终根据这些设置创建承印物。
“承印物”选项卡上的首选项设置由用户指定。 您可以在 PLA 客户端中定义它们。
缩放为无
选择毫米、厘米或英寸。
缩放为刀版
- 选择毫米、厘米或英寸。
- 为避免出现奇形怪状的承印物，请选择“舍入至最近”复选框，在框中输入数字，然后在“舍入”框中选择“向上”或“向下”。
注意：除非有足够大的页边空白可以防止页边空白出现负值，否则不能向下舍入。 - 根据需要选择“大小基于”：
- 刀版文件的所有线条，使刀版大小基于刀版中最外面的线条。
- 所有刀版台，使刀版大小基于刀版中的所有刀版台。
- 线类型，使您可以指定用于缩放刀版的线类型。
大小为多重拼贴、大小为印版、大小为胶片
...