PLA 11.0

Space shortcuts

Page tree

Versions Compared

Old Version 7

changes.mady.by.user Paul Kong

Saved on

compared with

New Version 8

changes.mady.by.user Paul Kong

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Removed translated content for 'zh'

...

languageen

If you are setting up for MIS data retrieval, specific XSLT fields are required for different layout types such as step-and-repeat and die-based layouts. 

Note: All units are provided in points by default. You can set the units of ShopMap resources directly in the schema to inches (in.), millimeters (mm), or centimeters (cm). The units of other parameters must be manually converted by adding math operations to the XSLT file. For example, add *72 to convert from inches to points. 

You can use Stylus Studio software to create XLST files. Find the procedure here.

Required XSLT fields for unpopulated step-and-repeat jobs

An unpopulated step-and-repeat job must include the following fields:

  • Job/jobName
  • Job/jobType: can be hard-coded to the name of the layout ticket in the PLA software
  • Job/layoutName: can be hard-coded to Layout
  • Job/Shopmap/PressSheet/Width
  • Job/Shopmap/PressSheet/Height
  • Job/StepRepeatList/StepRepeat/cols
  • Job/StepRepeatList/StepRepeat/rows
  • Job/StepRepeatList/StepRepeat/name: hard-code to SR1
  • Job/StepRepeatList/StepRepeat/id: hard-code to 1
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/ StepRepeatArtwork/scaleX: hard-code to 1
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/scaleY: hard-code to 1
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/dummyWidth
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/dummyHeight

Sample XML and XSLT files: unpopulated step and repeat

Start with an XML file such as the following:

<?xml version="1.0" encoding="UTF-8"?>
<Job xmlns:xsi=http://www.kodak.com
xsi:noNamespaceSchemaLocation="http://
www.kodak.com">
     <Info JobName="MIS-0001"/>
     <Prepress ArtworkWidth="19.125"
ArtworkHeight="15.5"/>
     <Stripping Around="1" Across="3"/>
     <Plate Width="57.375" Height="15.5"/>
</Job>

Create an XSLT file using XSLT editing software such as Stylus Studio:

< ?xml version='1.0'?>
<xsl:stylesheetversion="1.0"xmlns:xsl="http:
//www.w3.org/1999/XSL/
Transform">
  <xsl:templatematch="/">
    <JobjobType="Demo"layoutName="Layout">
      <xsl:attributename="jobName">
        <xsl:value-ofselect="Job/Info/
@JobName"/>
      </xsl:attribute>
      <StepRepeatList>
        <StepRepeatname="SR1"id="1">
          <xsl:attributename="cols">
            <xsl:value-ofselect="Job/
Stripping/@Across"/>
          </xsl:attribute>
          <xsl:attributename="rows">
            <xsl:value-ofselect="Job/
Stripping/@Around"/>
          </xsl:attribute>
          <StepRepeatArtworkList>
            <StepRepeatArtwork scaleX="1"
scaleY="1">

<xsl:attributename="dummyHeight">
                <xsl:value-ofselect="Job/
Prepress/@ArtworkHeight *72"/>
              </xsl:attribute>

<xsl:attributename="dummyWidth">
                <xsl:value-ofselect="Job/
Prepress/@ArtworkWidth*72"/>
              </xsl:attribute>
            </StepRepeatArtwork>
          </StepRepeatArtworkList>
        </StepRepeat>
     </StepRepeatList>
     <Shopmap>
       <PressSheetunit="in">
         <xsl:attributename="height">
           <xsl:value-ofselect="Job/Plate/
@Height"/>
         </xsl:attribute>
         <xsl:attributename="width">
           <xsl:value-ofselect="Job/Plate/
@Width"/>
         </xsl:attribute>
        </PressSheet>
      </Shopmap>
   </Job>
       </xsl:template>
 </xsl:stylesheet>

Required XSLT fields for populated step-and-repeat jobs

A populated step-and-repeat job must include the following fields:

  • Job/jobName
  • Job/jobType: can be hard-coded to the name of the layout ticket in the PLA software
  • Job/layoutName: can be hard-coded to Layout
  • Job/Shopmap/PressSheet/Width
  • Job/Shopmap/PressSheet/Height
  • Job/StepRepeatList/StepRepeat/cols
  • Job/StepRepeatList/StepRepeat/rows
  • Job/StepRepeatList/StepRepeat/name: hard-code to SR1
  • Job/StepRepeatList/StepRepeat/id: hard-code to 1
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/ownerID: hard-code to 1

  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/scaleX: hard-code to 1

  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/scaleY: hard-code to 1

  • Job/ArtworkList/Artwork/Name

  • Job/ArtworkList/Artwork/id: hard-code to 2

  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/referenceId: hard-code to 2

Sample XML and XSLT files: populated step and repeat jobs

Start with an XML file such as the following:

<?xml version="1.0" encoding="UTF-8"?>
<Job xmlns:xsi=http://www.kodak.com
xsi:noNamespaceSchemaLocation="http://
www.kodak.com">
     <Info JobName="MIS-0002"/>
     <Prepress Artwork="\\PrinergyServer
\LayoutAutomationSample\
  Resources\Hungry Cat Label\Hungry Cat
Label 1.pdf"/>
     <Stripping Around="1" Across="3"/>
     <Plate Width="57.375" Height="15.5"/>
</Job>

Create an XSLT file using XSLT editing software such as Stylus Studio:

< ?xml version='1.0'?>
<xsl:stylesheetversion="1.0"xmlns:xsl="http:
//www.w3.org/1999/XSL/
Transform">
  <xsl:templatematch="/">
    <JobjobType="Demo"layoutName="Layout">
      <xsl:attributename="jobName">
        <xsl:value-ofselect="Job/Info/
@JobName"/>
      </xsl:attribute>
            <ArtworkList>
        <Artworkid="2">
          <Name>
            <xsl:value-ofselect="Job/
Prepress/@Artwork"/>
          </Name>
        </Artwork>
      </ArtworkList>
      <StepRepeatList>
        <StepRepeatid="1"name="SR1">
          <xsl:attributename="cols">
            <xsl:value-ofselect="Job/
Stripping/@Across"/>
          </xsl:attribute>
          <xsl:attributename="rows">
            <xsl:value-ofselect="Job/
Stripping/@Around"/>
          </xsl:attribute>
          <StepRepeatArtworkList>

<StepRepeatArtworkownerId="1"referenceId="2"
scaleX="1"
            scaleY="1"/>
          </StepRepeatArtworkList>
        </StepRepeat>
      </StepRepeatList>
      <Shopmap>
        <PressSheetunit="in">
          <xsl:attributename="height">
            <xsl:value-ofselect="Job/Plate/
@Height"/>
          </xsl:attribute>
          <xsl:attributename="width">
            <xsl:value-ofselect="Job/Plate/
@Width"/>
          </xsl:attribute>
        </PressSheet>
      </Shopmap>
    </Job>
  </xsl:template>
</xsl:stylesheet>

Required XSLT fields for a die-based layout

A die-based layout must include the following fields:

  • Job/jobName
  • Job/jobType: can be hard-coded to the name of the layout ticket in the PLA software
  • Job/layoutName: can be hard-coded to Layout
  • Job/Shopmap/PressSheet/Width
  • Job/Shopmap/PressSheet/Height

  • Job/ArtworkList/Artwork/Name

  • Job/Die/Name

Sample XML and XSLT files: die-based layout

Start with an XML file such as the following:

<?xml version="1.0" encoding="UTF-8"?>
<Job xmlns:xsi=http://www.kodak.com
xsi:noNamespaceSchemaLocation="http://
www.kodak.com">
     <Info JobName="MIS-0003"/>
     <Prepress Artwork="\\PrinergyServer
\LayoutAutomationSample\
  Resources\Hungry Cat Carton\Hungry Cat
Carton 1.pdf"/>
  <Die DieFile="\\PrinergyServer
\LayoutAutomationSample\Resources\
  Hungry Cat Carton\Hungry Cat Carton.CF2"/>
  <Plate Width="40" Height="30"/>
</Job>

Create an XSLT file using XSLT editing software such as Stylus Studio:

< ?xml version='1.0'?>
<xsl:stylesheetversion="1.0"xmlns:xsl="http:
//www.w3.org/1999/XSL/
Transform">
  <xsl:templatematch="/">
    <JobjobType="Demo"layoutName="Layout">
      <xsl:attributename="jobName">
        <xsl:value-ofselect="Job/Info/
@JobName"/>
      </xsl:attribute>
            <ArtworkList>
        <Artwork>
          <Name>
            <xsl:value-ofselect="Job/
Prepress/@Artwork"/>
          </Name>
        </Artwork>
      </ArtworkList>
      <Die>
        <Name>
          <xsl:value-ofselect="Job/Die/
@DieFile"/>
        </Name>
      </Die>
      <Shopmap>
        <PressSheetunit="in">
          <xsl:attributename="height">
            <xsl:value-ofselect="Job/Plate/
@Height"/>
          </xsl:attribute>
          <xsl:attributename="width">
            <xsl:value-ofselect="Job/Plate/
@Width"/>
          </xsl:attribute>
        </PressSheet>
      </Shopmap>
    </Job>
 

...

languagezh

如果您正在为 MIS 数据检索进行设置，则需要针对不同的版式类型（如多重拼贴版式和基于刀版的版式）对指定的 XSLT 字段进行设置。

注意：默认情况下所有单位为磅。 您可以将模式中 ShopMap 资源的单位直接设置为英寸 (in.)、毫米 (mm) 或厘米 (cm)。 其他参数的单位必须通过向 XSLT 文件添加数学运算进行手动转换。 例如，添加 *72 从英寸转换为磅。

您可以使用 Stylus Studio 软件创建 XLST 文件。 在此处查找操作步骤。

未填充多重拼贴作业的所需 XSLT 字段

未填充多重拼贴作业必须包含以下字段：

  • Job/jobName
  • Job/jobType：可以在 PLA 软件中硬编码为版式传票名称
  • Job/layoutName：可以硬编码为 Layout
  • Job/Shopmap/PressSheet/Width
  • Job/Shopmap/PressSheet/Height
  • Job/StepRepeatList/StepRepeat/cols
  • Job/StepRepeatList/StepRepeat/rows
  • Job/StepRepeatList/StepRepeat/name：硬编码为 SR1
  • Job/StepRepeatList/StepRepeat/id：硬编码为 1
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/ StepRepeatArtwork/scaleX：硬编码为 1
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/scaleY：硬编码为 1
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/dummyWidth
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/dummyHeight

示例 XML 和 XSLT 文件：未填充多重拼贴

从如下所示的 XML 文件开始：

<?xml version="1.0" encoding="UTF-8"?>
<Job xmlns:xsi=http://www.kodak.com
xsi:noNamespaceSchemaLocation="http://
www.kodak.com">
<Info JobName="MIS-0001"/>
<Prepress ArtworkWidth="19.125"
ArtworkHeight="15.5"/>
<Stripping Around="1" Across="3"/>
<Plate Width="57.375" Height="15.5"/>
</Job>

使用 XSLT 编辑软件（例如 Stylus Studio）创建 XSLT 文件：

< ?xml version='1.0'?>
<xsl:stylesheetversion="1.0"xmlns:xsl="http:
//www.w3.org/1999/XSL/
Transform">
<xsl:templatematch="/">
<JobjobType="Demo"layoutName="Layout">
<xsl:attributename="jobName">
<xsl:value-ofselect="Job/Info/
@JobName"/>
</xsl:attribute>
<StepRepeatList>
<StepRepeatname="SR1"id="1">
<xsl:attributename="cols">
<xsl:value-ofselect="Job/
Stripping/@Across"/>
</xsl:attribute>
<xsl:attributename="rows">
<xsl:value-ofselect="Job/
Stripping/@Around"/>
</xsl:attribute>
<StepRepeatArtworkList>
<StepRepeatArtwork scaleX="1"
scaleY="1">

...

未填充多重拼贴作业的所需 XSLT 字段

未填充多重拼贴作业必须包含以下字段：

  • Job/jobName
  • Job/jobType：可以在 PLA 软件中硬编码为版式传票名称
  • Job/layoutName：可以硬编码为 Layout
  • Job/Shopmap/PressSheet/Width
  • Job/Shopmap/PressSheet/Height
  • Job/StepRepeatList/StepRepeat/cols
  • Job/StepRepeatList/StepRepeat/rows
  • Job/StepRepeatList/StepRepeat/name：硬编码为 SR1
  • Job/StepRepeatList/StepRepeat/id：硬编码为 1
  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/ownerID: ：硬编码为 1

  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/scaleX：硬编码为 1

  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/scaleY：硬编码为 1

  • Job/ArtworkList/Artwork/Name

  • Job/ArtworkList/Artwork/id：硬编码为 2

  • Job/StepRepeatList/StepRepeat/StepRepeatArtworkList/StepRepeatArtwork/referenceId：硬编码为 2

示例 XML 和 XSLT 文件：未填充多重拼贴作业

从如下所示的 XML 文件开始：

<?xml version="1.0" encoding="UTF-8"?>
<Job xmlns:xsi=http://www.kodak.com
xsi:noNamespaceSchemaLocation="http://
www.kodak.com">
<Info JobName="MIS-0002"/>
<Prepress Artwork="\\PrinergyServer
\LayoutAutomationSample\
Resources\Hungry Cat Label\Hungry Cat
Label 1.pdf"/>
<Stripping Around="1" Across="3"/>
<Plate Width="57.375" Height="15.5"/>
</Job>

使用 XSLT 编辑软件（例如 Stylus Studio）创建 XSLT 文件：

< ?xml version='1.0'?>
<xsl:stylesheetversion="1.0"xmlns:xsl="http:
//www.w3.org/1999/XSL/
Transform">
<xsl:templatematch="/">
<JobjobType="Demo"layoutName="Layout">
<xsl:attributename="jobName">
<xsl:value-ofselect="Job/Info/
@JobName"/>
</xsl:attribute>
 <ArtworkList>
<Artworkid="2">
<Name>
<xsl:value-ofselect="Job/
Prepress/@Artwork"/>
</Name>
</Artwork>
</ArtworkList>
<StepRepeatList>
<StepRepeatid="1"name="SR1">
<xsl:attributename="cols">
<xsl:value-ofselect="Job/
Stripping/@Across"/>
</xsl:attribute>
<xsl:attributename="rows">
<xsl:value-ofselect="Job/
Stripping/@Around"/>
</xsl:attribute>
<StepRepeatArtworkList>

<StepRepeatArtworkownerId="1"referenceId="2"
scaleX="1"
scaleY="1"/>
</StepRepeatArtworkList>
</StepRepeat>
</StepRepeatList>
<Shopmap>
<PressSheetunit="in">
<xsl:attributename="height">
<xsl:value-ofselect="Job/Plate/
@Height"/>
</xsl:attribute>
<xsl:attributename="width">
<xsl:value-ofselect="Job/Plate/
@Width"/>
</xsl:attribute>
</PressSheet>
</Shopmap>
</Job>
</xsl:template>
</xsl:stylesheet>

基于刀版的版式所需的 XSLT 字段

基于刀版的版式必须包含以下字段：

  • Job/jobName
  • Job/jobType：可以在 PLA 软件中硬编码为版式传票名称
  • Job/layoutName：可以硬编码为 Layout
  • Job/Shopmap/PressSheet/Width
  • Job/Shopmap/PressSheet/Height

  • Job/ArtworkList/Artwork/Name

  • Job/Die/Name

示例 XML 和 XSLT 文件：基于刀版的版式

从如下所示的 XML 文件开始：

<?xml version="1.0" encoding="UTF-8"?>
<Job xmlns:xsi=http://www.kodak.com
xsi:noNamespaceSchemaLocation="http://
www.kodak.com">
<Info JobName="MIS-0003"/>
<Prepress Artwork="\\PrinergyServer
\LayoutAutomationSample\
Resources\Hungry Cat Carton\Hungry Cat
Carton 1.pdf"/>
<Die DieFile="\\PrinergyServer
\LayoutAutomationSample\Resources\
Hungry Cat Carton\Hungry Cat Carton.CF2"/>
<Plate Width="40" Height="30"/>
</Job>

使用 XSLT 编辑软件（例如 Stylus Studio）创建 XSLT 文件：

...

</xsl:template>
</xsl:stylesheet>