Page History

...

Configure and enable an RBA rule set that creates a layout, sets up the job in Prinergy Workflow, and creates an imposition proof when a PLA job is created.

Note: You can also configure the rule set to perform additional actions—for example, create a layout proof when the layout is successfully imported, and generate an e-mail message to notify a customer service representative or operator that the proof is ready for viewing.

1. In Workshop, create a job or pre-job called PLATemplateJob that you will use as a template job for all jobs created from the MIS. 
   You will use this job later in this procedure.
   • For instructions on creating template jobs, see the Prinergy Workflow Workshop User Guide.
   • This step is not necessary if you have already created a template job.
   • To reduce the chance of the template job being accidentally modified or erased, create this job as a pre-job, which is less visible to operators. If this job is deleted, the RBA Create Job action will fail.
   • This job can also act as a repository for XML job tickets created by PLA. It must be preserved to prevent the loss of these tickets as templates.
2. In Workshop, select Tools > Rule Set Manager.
   Do not open Rule Set Manager from within a job. 
3. In the Rule Set Library pane, select the folder you created for storing system-level rule sets.
   Note: This guide uses PLA System Rule Sets as an example.
4. Click File > Import and perform these actions:
   1. From the Program Files (x86)\Kodak\Layout Automation\Sample Files\RuleSets folder on the Prinergy Workflow primary server, select LayoutAutomationRulesetMIS.zip .
   2. Click Import.
      The PLA System Rule Sets folder now contains the following rule: PLA MIS Automation.
5. Open the PLA MIS Automation rule set and configure the Create Layout action.
   
   1. To open the Create Layout action, double-click the line between the Read XML and the Create Layout actions.
   2. To set the Layout Output Path parameter (the location of the folder where you want the layout XML files to be generated), select the Layout Output Path box, and then browse to select the directory.
      Tip: Set this directory to be the PLATemplateJob\UserDefinedFolders of the template job created in the first step—for example, \\<server>\volume>\Jobs\PLATemplateJob\UserDefinedFolders. Using a standardized setup makes the system easier to troubleshoot by service personnel. When browsing to set the directory, select (do not open) the final directory before you click OK to set the path.
   3. To close the Create Layout action, click OK.
6. Perform the Create Job action.
   1. Double-click the line before the Create Layout action.
   2. Set the Template Job parameter to PLATemplateJob. Do not use the job that has the hot folder (HotFolderJob). Use the job that you set up as the template job.
      Because this rule is being set up to drive automatic creation of layouts from XML data, you can set up RBA e-mail notifications. These notifications are sent to customer service representatives or operators when layouts have been successfully completed and automatic proofs made. Notifications can also be sent to alert customer service representatives or operators if any of the processes have failed. Find instructions for setting up e-mail alerts in the Prinergy Rules Based Automation User Guide. 
7. Save the rule set and enable it for the hot folder job

...

创建 PLA 作业时，请配置和启用创建版式的 RBA 规则集，在印能捷工作流程中设置作业，并创建拼版打样。

注意：您也可以将规则集配置为执行其他操作 — 例如，当成功导入版式时创建版式打样，生成电子邮件以通知客户服务代表或操作员打样已就绪可供查看。

...

• 关于创建模板作业的说明，请参阅《印能捷工作流程 Workshop 用户指南》。
• 如果您已创建了一个模板作业，则无需执行此步骤。
• 要减少模板作业被意外修改或删除的机会，请将此作业创建为不易被操作员看到的预交作业。 如果此作业被删除，RBA 创建作业操作将失败。
• 此作业也可作为 PLA 创建的 XML 作业传票的存储库。 必须对其进行保留以防止丢失这些作为模板的传票。

...

1. .

...

1. 要打开创建版式操作，请双击读取 XML和创建版式操作之间的线。
2. 要设置 版式输出路径参数（您想要生成版式 XML 文件的文件夹位置），请选择“版式输出路径”框，然后浏览以选择目录。
   提示：将此目录设置为在第一步中创建的模板作业的 PLATemplateJob\UserDefinedFolders — 例如，\\<server>\volume>\Jobs\PLATemplateJob\UserDefinedFolders。 使用标准设置让服务人员更易于对系统进行故障排除。 当浏览以设置目录时，请在单击“确定”设置路径前，选择（不要打开）最终目录。
3. 要关闭创建版式操作，请单击“确定”。

...

1. 双击“创建版式”操作之前的线。
2. 将模板作业参数设置为 PLATemplateJob。 请勿使用具有热文件夹 (HotFolderJob) 的作业。 请使用设置为模板作业的作业。
   因为此规则设置为通过 XML 数据自动创建版式，你可以设置 RBA 电子邮件通知。 当成功完成版式并自动制作打样时，将向客户服务代表或操作员发送这些通知。 如果任一流程失败，还可以发送通知以提醒客户服务代表或操作员。 在《印能捷基于规则的自动化用户指南》中查找有关设置电子邮件警报的说明。 

...