...
| language | en |
|---|
The Pandora software provides registration marks to help ensure that your plates are in register on press. You can also create your own marks and import them into the User folder on the Marks palette. You can place registration marks freely. There are no limitations for the position of these marks.
Registration mark | Description |
|---|---|
REG_Chop.pdf | Used to judge the alignment of the die cut. Five parallel ticks that are longer in the middle and shorter on the outside |
REG_Chop_Crown.pdf | Parallel ticks with fat rectangles on the side. Uses primary color (black or the first color in the job). |
REG_Cross.pdf | An "image-thrifty" target most commonly used in packaging |
REG_Cross-Arrowhead.pdf | Target useful for tracking rotational orientation and inversion |
REG_Cross-Grand_6-color.pdf | An "image-thrifty" target most commonly used in packaging |
REG_Cross_ Pinpoint.pdf | Useful where extreme accuracy is needed. Requires a dot glass, and ensures the finest accuracy on press. |
REG_Cross_Small.pdf | An "image-thrifty" target useful where there is minimal space |
REG_Cross_Small_ Accented.pdf | Smaller variation of the pinpoint mark for tight places |
REG_Framed_ Swatches.pdf | Squares of the first six colors in the job, each in a "primary" box. Flexographic lineup target, similar to Lineup Lanes. The evenness of the white portion within the boxes shows registration at a glance. Can also be used by electronic scanners for registering and calibrating colors on press. |
REG_Jasmine_ 7-color.pdf | Uses the first seven colors in the job. The fourth color superimposes all the rest, to allow you to measure registration with respect to a single standard. |
REG_Lineup_Lanes_ 6-color.pdf | Uses the first six colors in the job. Bulky mark for inspecting flexographic registration at a glance; not intended for great accuracy. Like the Jasmine mark, all colors are registered with respect to a single standard color. The object is for the press to keep the dashes centered on the vertical and horizontal lines. The shorter legs contain all six colors overlapping. The length of each is stepped so that it is easy to tell which color is most out of line. |
REG_Micro Dot.pdf | Useful where there is not enough trim to place a regular registration mark. It is usually placed in an inconspicuous place such as over a fused seam, and appears as a stray fleck of color |
REG_Micro Dot_Double.pdf | A large version of the micro dot. It also expresses relative orientation. |
REG_Nanaimo Bar.pdf | Easy to spot on any substrate. To prevent too much ink coverage in one spot, the fill is a 70% halftone in the registration color. |
REG_Slur_Circle Slash.pdf | Uses the registration color. Identifies slurring on press and can also display as moiré when the work is out of registration. |
REG_Starburst_Daisy.pdf | Displays as moiré if the image is even slightly out of register. Moiré color and direction are apparent without examination with a loupe. Uses the first color in the job. |
REG_Target.pdf | Crosshairs and circle |
REG_Target_Broken.pdf | Crosshairs and circle, with breaks in the circle. It is less conspicuous than REG_Target, but not as strong. It has axial control. |
REG_Target_Filled.pdf | Most commonly used target for registration. It tracks registration on all axes in positive and negative image. |
REG_Target_Full.pdf | A target that gives the maximum circumference for its diameter |
REG_Target_Pinwheel.pdf | Alternate version of REG_Target_Filled |
REG_Target_Small.pdf | Smaller version of REG_Target |
REG_Target_Square_CMYK.pdf | Tracks trap registration. Colors are set to touch each other and black. If a white line or a dark trapping line appears, the trap may be out of registration. |
REG_Target_Square_Filled.pdf | Square version of REG_Target_Filled, useful for checking axial registration |
REG_Target_T-slash.pdf | Offers greatest axial integrity |
REG_Vernier_Grid.pdf | Uses colors 1, 2, 3, 5, and primary. A precision mark used for calibrating registration to the nearest thousandth of an inch |
...
| language | zh |
|---|
Pandora 软件提供了一些套准标记，以帮助确保印版在印刷机上套准。 您还可以创建自己的标记，并将它们导入到“标记”面板上的 User 文件夹。 可以自由地放置套准标记。 对于这些标记的位置没有任何限制。
...
套准标记
...
说明
...
REG_Chop.pdf
...
用来判断刀版剪切的对齐。 五个平行的勾号，中部较长，外侧较短
...
REG_Chop_Crown.pdf
...
平行勾号，侧面具有较方的矩形。 使用主色（黑色或作业中的第一种颜色）。
...
REG_Cross.pdf
...
包装中最常用的一种“图像丰富的”目标
...
REG_Cross-Arrowhead.pdf
...
对于跟踪旋转方向和反转很有用的目标
...
. |
...
包装中最常用的一种“图像丰富的”目标
...
REG_Cross_ Pinpoint.pdf
...
需要极高精确度时很有用。 需要点式玻璃，确保印刷机上的最佳精确度。
...
REG_Cross_Small.pdf
...
一种“图像丰富的”目标，当空间极小时很有用
...
REG_Cross_Small_ Accented.pdf
...
针尖标记较小的变体，用于紧凑的地方
...
REG_Framed_ Swatches.pdf
...
作业中前六种颜色的方形，每种都在一个“主色”框中。 柔性版排队目标，类似于排队通道。 框内白色部位的均匀度粗略显示了套准。 还可以由电子扫描仪用来在印刷机上套准和校准颜色。
...
REG_Jasmine_ 7-color.pdf
...
使用作业中的前七种颜色。 第四种颜色叠加了所有剩余的颜色，以允许您按照单个标准测量套准。
...
REG_Lineup_Lanes_ 6-color.pdf
...
使用作业中的前六种颜色。 用于粗略检查柔性版套准的大标记；不适用于很高的精确度。 如同 Jasmine 标记一样，所有颜色都根据单个标准颜色来套准。 该对象用于印刷机，以保持短划线在垂直线和水平线上都居中。 较短的支线包含所有六种颜色重叠。 每个的长度都是拼贴的，以便于了解线中哪种颜色最多。
...
REG_Micro Dot.pdf
...
在没有足够的净尺寸放置常规的套准标记时很有用。 通常放置在不显眼的位置，例如在合并的接缝上，并显示为杂乱的颜色斑点
...
REG_Micro Dot_Double.pdf
...
微点的大版本。 还表现相对方向。
...
REG_Nanaimo Bar.pdf
...
便于在任何承印物上定点； 以防止某一点上覆盖过多墨水，填充程度是套准颜色的 70% 半色调。
...
REG_Slur_Circle Slash.pdf
...
使用套准色。 标识印刷机上的斑点，还可以在作业未套准的情况下显示波纹。
...
REG_Starburst_Daisy.pdf
...
图像即使只是轻微未套准也显示波纹； 波纹颜色和方向很明显，无需用放大镜检查。 使用作业中的第一种颜色。
...
REG_Target.pdf
...
十字准线和圆圈
...
REG_Target_Broken.pdf
...
十字准线和圆圈，圆圈中有断点； 不如 REG_Target 明显；有轴向控制， 但不强。
...
REG_Target_Filled.pdf
...
套准的最常用目标； 在正图像和负图像中的所有轴上跟踪套准。
...
REG_Target_Full.pdf
...
某个目标，该目标为其直径提供最大周长
...
REG_Target_Pinwheel.pdf
...
REG_Target_Filled 的备用版本
...
REG_Target_Small.pdf
...
REG_Target 的较小版本
...
REG_Target_Square_CMYK.pdf
...
跟踪陷印套准。 颜色设置为相互邻接和黑色。 如果白色线或深色捕获线出现，则陷印可能未套准。
...
REG_Target_Square_Filled.pdf
...
REG_Target_Filled 的方形版本，对于检查轴向套准很有用
...
REG_Target_T-slash.pdf
...
提供最大的轴向完整性
...
REG_Vernier_Grid.pdf
...