...
| language | en |
|---|
If you use the Pandora software integrated with Prinergy Workflow, you may want to swap out existing artwork and change the existing step-and-repeat layout. For example, a layout that contained 20 labels for strawberry jam in a 5 x 4 step-and-repeat now needs to print as 15 labels for peach jam. Rather than creating a new job, you can reuse the existing layout by changing the step-and-repeat layout and replacing the artwork.
If you want to reuse the 20-label layout to print two different pieces of artwork (for example, five labels for strawberry jam and ten labels for peach jam), you must edit the step-and-repeat layout first in Pandora before replacing the artwork in Prinergy Workflow.
In this case, you can change:
- Distance/gap
- Position
- Stagger type and offset distance
- Layout centering
You cannot change:
- Wrap
- Number of placements (columns/rows)
Figure 1. Editing the step-and-repeat layout and swapping artwork in Prinergy Workflow
...
...
| language | zh |
|---|
如果使用与印能捷工作流程集成的 Pandora 软件，您可能希望调换现有页面，以及更改现有多重拼贴的版式。 例如，包含 20 个草莓果酱标签的版式（5x4 多重拼贴）现在需要打印为 15 个桃酱标签。 可以通过更改多重拼贴版式和替换页面来重新使用现有的版式，而不是创建全新的作业。
如果希望重新使用 20 个标签的版式来打印两个不同的页面（例如 5 个草莓果酱标签和 10 个桃酱标签），必须首先在 Pandora 中编辑多重拼贴版式，然后在印能捷工作流程中替换页面。
在此情况下，可以更改：
- 距离/间距
- 位置
- 交错类型和偏移距离
- 版式居中
不能更改：
- 打包
- 版式数（栏/行）
...