...
| language | en |
|---|
To print the die station number on output, you can bind a mark to the die station. The die station number marks are in the Labels folder on the Marks palette. When die station number marks are not bound to artwork, the die station numbers do not appear. When die station numbers are bound to artwork, Pandora software replaces the placeholder with the number of the die station to which the mark is bound. See the table of Label marks for descriptions of the three die station number marks.
- Select the die station.
- Select the mark.
- From the Object menu, select Bind Mark to Die Station.
The binding status of a mark is indicated by the Bound icon on the Geometry palette. When the selected mark is bound, the Bound icon is shown. If the middle circle is missing, the mark is not bound to the die station, but the Bound icon indicates the mark's binding status only when the mark alone is currently selected. If the die station is also selected, the Bound icon is shown as missing the middle circle the die station is not bound to the mark even though the mark is bound to the die station.
Note: When binding a mark to a die station, be sure to select the die station. Do not select the entire die or the artwork. When you select the die station, the selection handles are hollow. When you select the entire die or the artwork, the selection handles at the outside corners are black. You cannot bind a mark to a die if more than one die station is selected, and you cannot bind a mark to locked dies.
...
| language | zh |
|---|
要在输出中打印刀版台编号，您可以将标记绑定到刀版台。 刀版台编号标记位于“标记”面板上的“标签”文件夹中。 刀版台编号标记没有绑定到页面时，不会显示刀版台编号。 刀版台编号绑定到页面时，Pandora 软件会使用标记绑定到的刀版台编号替换占位符。 请参阅表格 Label marks，以查看三种刀版台编号标记的描述。
- 选择刀版台。
- 选择标记。
- 从“对象”菜单中，选择“将标记绑定到刀版台”。
标记的绑定状态由图形面板上的已绑定图标来表示。 当选定标记已绑定时，会出现“已绑定”图标。 如果缺少中间的圆圈，则表明标记未绑定到刀版台；但是，仅当标记当前是单独选中时，“已绑定”图标才会指出标记的绑定状态。 如果也选中了刀版台，也会显示此“已绑定”图标，但缺少中间的圆圈，表示即使标记已绑定到刀版台，但刀版台并未绑定到此标记。
...