...
| language | en |
|---|
- Confirm that Snap Distance (pixels) has been defined in Preferences > General > Measurements.
The default setting is 3 pixels. It should be increased to a higher value to use this feature. The maximum setting is 10. Experiment to find the best setting for your purpose. - Position the first artwork on the substrate. If multiples are required, perform the step-and-repeat.
- Place the second artwork on the substrate. If multiples of it are required, perform the step-and-repeat.
- Drag the second artwork or step-and-repeat to the edge of the first artwork and/or step-and-repeat.
If you need the top to align, drag it to the top. If you need the bottom to align, drag it to the bottom, and so on.
When you are in close proximity to the first object, a snap guideline appears either vertically or horizontally to show you that they are in proper alignment.
The artwork and/or step-and-repeats are now aligned.
...
| language | zh |
|---|
- 确认在“首选项 > 常规 > 度量”中已经定义了“对齐距离”（像素数）。
默认设置是 3 个像素。 应增加到较高的值才能使用该功能。 最大设置为 10 个像素。 请试验以找出最适合您目的的设置。 - 将第一个页面放在承印物上。 如果需要多个页面，请执行多重拼贴。
- 将第二个页面放在承印物上。 如果需要多个页面，请执行多重拼贴。
- 将第二个页面或多重拼贴拖至第一个页面和/或多重拼贴的边缘。
如果需要顶部对齐，请将其拖至顶部。 如果需要底部对齐，请将其拖至底部，以此类推。
当您非常接近第一个对象时，会垂直或水平显示一条对齐线，向您显示它们是否已正确对齐。
...