Page History

...

You can add a press to the ShopMap palette by typing information and selecting settings in the New Press dialog box.

In the case of a press that also allows direct printing, such as Heidelberg Direct Imaging, you need to add the device to the ShopMap palette both as a press and an output device to have individual configurations.

1. If the ShopMap palette is not currently shown, select Show ShopMap Palette from the Window menu.
2. Click Materials.
3. Click the Press tab.
4. Click the options arrow on the ShopMap palette, and then select New.
5. In the Name box, type the name of the press.
6. In the Units box, select the measurement units to use.
7. In the Setback box, type the setback between the substrate and the film or plate, or between the plate and film.
8. In the Gripper box, type the gripper margin.
9. In the Plate bend box, type the plate bend.
10. In the First knife box, type the distance from the edge of the sheet to the edge of the die.
11. Click Create.

...

可以通过在“新建印刷机”对话框中输入信息并选择设置，将印刷机添加到 ShopMap 面板中。

如果印刷机还允许直接打印，如 Heidelberg 直接成像印刷机，则需要将设备作为印刷机和输出设备添加到 ShopMap 面板中以进行单独配置。

...