Page History

...

Automate bleed path resolution by creating all the bleed with overlaps as a special line type in the CAD program you use (for example, Esko Artios or Arden Impact). The Pandora software will use this line type to create the bleed.

Perform the following procedure to set up bleed path resolution based on CAD file line type. Repeat the procedure if the CAD file line type changes.
Note: If you are using Pandora in integrated mode with the Prinergy Workflow software and the Packaging Layout Automation software, you must make similar adjustments to the Preferences settings of the Packaging Layout Automation Client. For more details, see the Packaging Layout Automation User Guide.

1. Start Pandora.
2. Depending on your operating system, perform one of the following actions:
   • On a Macintosh client computer: Select Pandora > Preferences > Die Settings.
   • On a Windows OS-based computer: Select Edit > Preferences > Die Settings.
3. In the Bleed area, select the Honor bleed path in CAD file check box.
   Note: If the Honor bleed path in CAD file check box is selected and the software detects an error with bleed path generation, it will send the following error message:
   Pandora detected an error with bleed path generation.
Possible causes: 
Some die stations are not closed (gaps between cutlines)
"Honor bleed path in CAD file" was selected but no bleed path line type was detected
Some bleed paths in the CAD file are not closed 
Please, check all generated bleed paths carefully to make sure they are correct.
   Pandora will continue processing the file, but the bleed overlaps must be resolved manually.
4. In the Bleed Path Line Type box, enter the number that is used by the CAD program for bleed line definition, and click OK.
   (Optional) These values can also be modified in the Pandora DefaultUser.properties file by performing the following procedure:

1. 1. Find the DefaultUser.properties in C:\Program Files (x86)\Kodak\Pandora4.0.2 or later and open it in a text editor such as Notepad.
   2. Set the Die.UseBleedLine parameter to true.
   3. Add the following line to the DefaultUser.properties file: Die.BleedLineNum=die line type number.
   4. Select File > Save, and then close the file.

See Resolve bleed path based on CAD file line type for more information

...

...

自动化出血路径的解决，方法是创建所有具有重叠的出血，作为您使用的 CAD 程序（例如 Esko Artios 或 Arden Impact）中的特殊线条类型。 Pandora 软件将使用此线条类型创建出血。

执行以下步骤以设置解决基于 CAD 文件线条类型的出血路径。 如果 CAD 文件线条类型发生更改重复此步骤。
注意：如果您使用的是与印能捷工作流程软件和 Packaging Layout Automation 软件集成的 Pandora，您必须对 Packaging Layout Automation 客户端的“首选项”设置进行类似的调整。 有关详细信息，请参见《Packaging Layout Automation 用户指南》。

...

• 在 Macintosh 客户端计算机上：选择“Pandora > 首选项 > 刀版设置”。
• 在基于 Windows 操作系统的计算机上：选择“编辑 > 首选项 > 刀版设置”。

...

.

...

1. 1. 在 C:\Program Files (x86)\Kodak\Pandora4.0.2 或更高版本 中查找 DefaultUser.properties，然后使用记事本等文本编辑器将其打开。
   2. 将 Die.UseBleedLine 参数设置为 true。
   3. 将下一行添加到 DefaultUser.properties 文件中：Die.BleedLineNum=刀版线类型编号。
   4. 选择“文件 > 保存”，然后关闭该文件。

...