Sv translation | ||
---|---|---|
| ||
Before setting up Mac client computer file-sharing, you must understand which server and client computers are qualified, the file-sharing protocols that are supported, and the limitations of each protocol. The recommended configuration is:
If you need to convert file-sharing protocols:
Mac client computers are recommended to use the SMB protocol. AFP protocols are not qualified with Prinergy, including ExtremeZ-IP.
SMB The Server Message Block protocol is built into the Windows operating system. SMB is also known as CIFS and Microsoft Windows network. On UNIX servers, SMB can be implemented with Samba software. SMB handles file resources in the following ways:
Important: AppleDouble was supported for versions of Mac OS X prior to 10.5. Prinergy no longer supports these older versions of Mac OS X and therefore we recommend SMB with named forks rather than AppleDouble. AFP Apple Filing Protocol, which is built into the Mac OS. AFP stores file resources in resource forks. Note: AFP is not qualified with Prinergy Workflow 8.0.
Network File System (UNIX connectivity) NFS connectivity is not supported (as of Prinergy 5.1). Use SMB protocol instead to provide UNIX connectivity. With this change, UNIX client computers will not be able to access files/shares hosted in the Prinergy servers. Files needed by a UNIX client computer must be pushed from the Prinergy primary server to a UNIX server that is configured with SMB/CIFS protocol (such as Samba).
Samba Open-source file server software that you can install on a UNIX tertiary server to provide SMB connections for the Windows Prinergy primary and secondary servers.
Many Mac client computer protocols have significant limitations in a Prinergy system.
AFP AFP is not qualified with Prinergy Workflow 8.0. NFS NFS is not qualified for use with Prinergy. |
Sv translation | ||
---|---|---|
| ||
Vor dem Einrichten der Dateifreigabe für Mac-Clientcomputer müssen Sie zuerst wissen, welche Server und Clientcomputer geeignet sind, welche Dateifreigabeprotokolle unterstützt werden und welche Einschränkungen die Protokolle aufweisen. Dies ist die empfohlene Konfiguration:
Wenn Sie Dateifreigabeprotokolle umwandeln müssen:
Für Mac-Clientcomputer wird empfohlen, das SMB-Protokoll zu verwenden. AFP-Protokolle sind für Prinergy nicht geeignet, einschließlich ExtremeZ-IP.
SMB Das SMB-Protokoll (Server Message Block) ist in das Windows-Betriebssystem integriert. SMB ist auch als CIFS und Microsoft Windows-Netzwerk bekannt. Auf UNIX-Servern kann SMB mit Samba-Software implementiert werden. SMB verarbeitet Dateiressourcen wie folgt:
Wichtig:AppleDouble wurde für ältere Versionen vor MacOSX10.5 unterstützt. Prinergy unterstützt diese älteren Versionen von MacOSXnicht mehr, daher wird empfohlen, SMB mit benannten Zweigen statt AppleDouble zu verwenden. AFP Apple Filing Protocol, integriert in MacOS.AFP speichert Dateiressourcen in Ressourcenzweigen. Hinweis: AFP ist nicht für Prinergy Workflow8.0 geeignet.
NFS (UNIX-Konnektivität) NFS-Konnektivität wird nicht unterstützt (ab Prinergy5.1). Verwenden Sie stattdessen das SMB-Protokoll, um UNIX-Konnektivität bereitzustellen. Mit dieser Änderung haben UNIX-Clientcomputer keinen Zugriff mehr auf Dateien/Freigaben, die auf Prinergy-Servern gehostet werden. Vom UNIX-Clientcomputer benötigte Dateien müssen vom Prinergy-Hauptserver auf einen UNIX-Server verschoben werden, der für das SMB/CIFS-Protokoll konfiguriert ist (wie z.B. Samba).
Samba Open-Source-Dateiserversoftware, die Sie auf einem UNIX-Nebenserver installieren können, um SMB-Verbindungen für Windows Prinergy-Haupt- und -Zusatzserver bereitzustellen.
Viele Mac-Clientcomputerprotokolle haben erhebliche Einschränkungen in einem Prinergy-System.
AFP AFP ist nicht für Prinergy Workflow8.0 geeignet. NFS NFS ist für die Verwendung mit Prinergy nicht geeignet. |
Sv translation | ||
---|---|---|
| ||
Antes de configurar los recursos compartidos de archivos de equipos Mac cliente, debe tener en cuenta los equipos cliente y servidor que son aptos, los protocolos de recursos compartidos de archivos que son compatibles y las limitaciones de cada protocolo. La configuración recomendada es:
Si necesita convertir los protocolos de recursos compartidos de archivos:
Para equipos Mac cliente se recomienda utilizar el protocolo SMB. Los protocolos AFP no son aptos para Prinergy, incluido ExtremeZ-IP.
SMB El protocolo Server Message Block está integrado en el sistema operativo Windows. SMB también se conoce como CIFS y Red de Microsoft de Windows. En servidores UNIX, puede implementarse SMB con software Samba. SMB gestiona recursos de archivos de la siguiente manera:
Importante:AppleDouble era compatible con las versiones de Mac OS X anteriores a la 10.5. Prinergy ya no admite estas versiones anteriores de Mac OS X y, por lo tanto, recomendamos SMB con bifurcaciones con nombre en lugar de AppleDouble. AFP Apple Filing Protocol, que está integrado en Mac OS.AFP almacena los recursos de archivos en bifurcaciones de recursos. Nota: AFP no puede utilizarse con Prinergy Workflow 8.0.
Sistema de archivos de red (conectividad de UNIX) No se admite la conectividad NFS (a partir de Prinergy 5.1). Utilice en su lugar el protocolo SMB para proporcionar conectividad con UNIX. Con este cambio, los equipos UNIX cliente no podrán acceder a archivos o recursos compartidos alojados en los servidores de Prinergy. Los archivos que necesita el cliente UNIX deben descargarse desde el servidor principal de Prinergy a un servidor de UNIX configurado con el protocolo SMB/CIFS (como Samba).
Samba Software de servidor de archivos de código abierto que puede instalar en un servidor UNIX terciario para proporcionar conexiones SMB para servidores principales y secundarios de Windows Prinergy.
Muchos protocolos de equipos Mac cliente presentan limitaciones considerables en un sistema Prinergy.
AFP AFP no puede utilizarse con Prinergy Workflow 8.0. NFS NFS no puede utilizarse con Prinergy. |
Sv translation | ||
---|---|---|
| ||
Avant de configurer le partage de fichiers des ordinateurs clients Mac, vous devez identifier les serveurs et ordinateurs clients approuvés, les protocoles de partage de fichiers pris en charge et les limites de chaque protocole. La configuration recommandée est la suivante:
Si vous devez convertir des protocoles de partage de fichiers:
Pour les ordinateurs clients Mac, le protocole SMB est recommandé. Les protocoles AFP ne sont pas compatibles avec Prinergy, y compris ExtremeZ-IP.
SMB Le protocole SMB (Server Message Block) est intégré au système d'exploitation Windows. SMB est également connu sous les noms suivants: CIFS et Microsoft Windows Network. Sur les serveurs UNIX, SMB peuvent être mis en œuvre avec le logiciel Samba. SMB gère les ressources des fichiers comme suit:
Important:AppleDouble était pris en charge par les versions de MacOSX antérieures à la version10.5. Prinergy ne prend plus en charge ces anciennes versions de MacOSX; par conséquent, nous vous recommandons d'utiliser SMB avec fourchettes nommées plutôt qu'AppleDouble. AFP Le protocole AFP (Apple Filing Protocol) est intégré au système d'exploitation Mac.Ce protocole stocke les ressources des fichiers dans des fourchettes de ressources. Remarque: AFP n'est pas compatible avec Prinergy Workflow8.0.
Network File System (Connectivité UNIX) La connectivité NFS n'est pas prise en charge (à partir de Prinergy5.1). Utilisez le protocole SMB pour fournir la connectivité UNIX. Suite à cette modification, les ordinateurs clients UNIX n'auront pas accès aux fichiers/partages hébergés sur les serveurs Prinergy. Les fichiers nécessaires à un ordinateur client UNIX doivent être ôtés du serveur Prinergy principal pour être placés sur un serveur UNIX configuré avec le protocole SMB/CIFS (tel que SAMBA).
Samba Logiciel de serveur de fichiers open source que vous pouvez installer sur un serveur tertiaire UNIX pour fournir les connexions SMB aux serveurs Prinergy principaux et secondaires.
De nombreux protocoles d'ordinateurs clients Mac présentent d'importantes limites dans un système Prinergy.
AFP AFP n'est pas compatible avec Prinergy Workflow8.0. NFS NFS n'est pas compatible avec Prinergy. |
Sv translation | ||
---|---|---|
| ||
Prima di impostare la condivisione file per computer client Mac, è necessario comprendere quale server e quali computer client sono compatibili, quali protocolli di condivisione file sono supportati e quali sono i limiti di ogni protocollo. La configurazione consigliata è:
Se è necessario convertire i protocolli di condivisione file:
Con i computer client Mac si consiglia l'uso del protocollo SMB. I protocolli AFP non sono compatibili con Prinergy, compresi ExtremeZ-IP.
SMB Il protocollo Server Message Block è integrato nel sistema operativo Windows. SMB è noto anche come CIFS e rete Microsoft Windows. Sui server UNIX, SMB può essere implementato con software Samba. SMB gestisce le risorse di file nei seguenti modi:
Importante:AppleDouble era supportato per le versioni di MAC OS X precedenti a quella 10.5. Prinergy non supporta più queste vecchie versioni di Mac OS X e, pertanto, consigliamo SMB con fork denominati piuttosto che AppleDouble. AFP Apple Filing Protocol, integrato sul sistema operativo Mac OS.AFP archivia le risorse di file in fork risorse. Nota: AFP non è compatibile con Prinergy Workflow 8.0.
Network File System (connettività UNIX) La connettività NFS non è supportata (per la versione Prinergy 5.1). Utilizzare il protocollo SMB anziché fornire connettività UNIX. Con questa modifica, i computer client UNIX non potranno accedere a file/condivisioni in host su server Prinergy. È necessario che i file richiesti da un computer client UNIX siano spostati dal server primario Prinergy a un server UNIX configurato con il protocollo SMB/CIFS (ad esempio, Samba).
Samba Software per file server open source che è possibile installare su un server terziario UNIX per fornire connessioni SMB per i server primari e secondari Windows Prinergy.
Molti protocolli per computer client Mac hanno delle limitazioni significative in un sistema Prinergy.
AFP AFP non è compatibile con Prinergy Workflow 8.0. NFS NFS non è compatibile per l'uso con Prinergy. |
Sv translation | ||
---|---|---|
| ||
Mac クライアントのファイル共有を設定する前に、対応しているサーバーとクライアント コンピュータ、サポートされているファイル共有プロトコル、各プロトコルの制限を理解しておく必要があります。 推奨される構成は以下のとおりです。
ファイル共有プロトコルを変換する必要がある場合は、以下のガイドラインに従います。
Mac クライアント コンピュータでは、SMB プロトコルの使用が推奨されています。AFP プロトコルは Prinergy では対応していません(ExtremeZ-IP を含む)。
SMB Server Message Block(SMB)プロトコルは、Windows オペレーティング システムに組み込まれています。SMB は、CIFS および Microsoft Windows ネットワークとも呼ばれています。UNIX サーバーの場合、SMB は Samba ソフトウェアと一緒に実装できます。 SMB は以下の方法でファイル リソースを処理します。
重要:AppleDouble は、Mac OS X の 10.5 より前のバージョンでサポートされていました。Prinergy では、Mac OS X のこれらの古いバージョンはサポートを終了しているため、AppleDouble ではなく、Named Fork を使用した SMB の使用を推奨します。 AFP AFP(Apple Filing Protocol)は、Mac OS に組み込まれています。AFP は、リソース フォークにファイル リソースを保存します。 注意:AFP は、Prinergy Workflow 8.0 では認定されていません。
NFS(ネットワーク ファイル システム)(UNIX 接続) NFS 接続は、サポートされていません(Prinergy 5.1 現在)。代わりに SMB プロトコルを使用して、UNIX 接続を提供してください。この変更により、UNIX クライアント コンピュータは、Prinergy サーバーでホストされているファイル/共有にアクセスできなくなります。UNIX クライアント コンピュータで必要とされるファイルは、Prinergy プライマリ サーバーから SMB/CIFS プロトコル(SAMBA など)で設定された UNIX サーバーにプッシュされる必要があります。
Samba UNIX ターシャリ サーバーにインストール可能なオープンソース ファイル サーバー ソフトウェアで、Windows Prinergy プライマリおよびセカンダリ サーバーの SMB 接続を提供します。
多くの Mac クライアント コンピュータ プロトコルには、Prinergy システムにおいて大幅な制限があります。
AFP AFP は、Prinergy Workflow 8.0 では認定されていません。 NFS NFS は Prinergy での使用は認定されていません。 |
Sv translation | ||
---|---|---|
| ||
在设置 Mac 客户机文件共享之前,您必须了解哪些服务器和客户机符合要求、受支持的文件共享协议以及对每个协议的限制。 建议的配置是:
如果您需要转换文件共享协议:
Mac 客户机建议使用 SMB 协议。AFP 协议不符合印能捷要求,包括 ExtremeZ-IP。
SMB 服务器消息块协议内置在 Windows 操作系统中。SMB 也称为 CIFS 和 Microsoft Windows 网络。在 UNIX 服务器上可以使用 Samba 软件实施 SMB。 SMB 通过以下方式处理文件资源:
重要提示:Mac OS X 10.5 之前的版本支持 AppleDouble。印能捷不再支持这些旧版本的 Mac OS X,因此我们建议您使用带指定分叉的 SMB,而不是带 AppleDouble 的 SMB。 AFP 内置在 Mac OS 中的 Apple Filing Protocol。AFP 将文件资源存储在资源分叉中。 注意:AFP 不适用于印能捷 Workflow 8.0。
网络文件系统(UNIX 连接) 不支持 NFS 连接(自印能捷 5.1 起)。请使用 SMB 协议提供 UNIX 连接。进行该更改后,UNIX 客户机将无法访问印能捷服务器中托管的文件/共享。UNIX 客户机需要的文件必须从印能捷主服务器转移到使用 SMB/CIFS 协议(例如 Samba)配置的 UNIX 服务器。
Samba 可以安装在 UNIX 三级服务器上的开放源代码文件服务器软件,为 Windows 印能捷主服务器和辅助服务器提供 SMB 连接。
许多 Mac 客户机协议在印能捷系统中具有显著的局限性。
AFP AFP 不适用于印能捷 Workflow 8.0。 NFS NFS 不能与印能捷配合使用。 |