This guide describes how to upgrade the Kodak InSite Prepress Portal Enterprise software to version 910.5 0 or later.
The Prepress Portal Enterprise 910.5 0 upgrade is available for systems running Prepress Portal 9.2 on 5 on Windows 2019. Customers that use earlier versions of Prepress Portal must upgrade to InSite 9.2 5 and be running on Microsoft Windows 2019 before upgrading to version 910.50.
Prepress Portal 910.5 0 satellite servers require Kodak Prinergy Workflow or Prinergy Workflow Packaging Automation Expansion Pack 9.0.1 5 and later.
Important:
If your system is not using the Prepress Portal 9.2 5 software, do not attempt this upgrade and contact your local Response Center representative for assistance.
Your Enterprise system cannot be in a mixed environment. Before you begin the overall upgrade of your Enterprise system to version 910.50, all servers must be running Prepress Portal 9.25.
If the installed Prinergy version used with InSite satellite servers is not 9.0.1 5 or later, upgrade the Prinergy servers before upgrading Prepress Portal Enterprise to version 910.50.
If you need assistance to upgrade to Prepress Portal 910.50, contact your local Response Center representative.
...
For more information, see the current Prepress Portal Release Notes and the InSite Client Configuration Technical Bulletin on Cloud Help, and the Prepress Portal System Administration Guide on https://partnerplace.kodak.com/on Customer Portal.
Time required
Allow sufficient time for the upgrade process.
The general installation of version 910.5 0 will take approximately 30-60 minutes per satellite server but each of those upgrades can be performed simultaneously. As for the Enterprise server and Standby server (if applicable), you need to allow up to 4 hours to complete the upgrade.
Important: Schedule downtime to encompass upgrade of all Satellite servers and Enterprise server and Standby server if it exists. During this time, there should be no access via the main Enterprise URL or by Satellite (Open Topology) URL.