The following table lists the Vendor/DFEs/Digital Presses supported with different Prinergy connectivity method for version 9.0.1 and above.
*JTE Method refers to the connection added via Setup and Send to Digital via Job Ticket Editor Window.
*Legacy Method refers to the connection added via Prinergy Administrator and Send to Digital via Digital Submit/Digital Direct.
Vendor / DFE / Digital Press | JTE Method | Legacy Method |
---|---|---|
Kodak Creo Server | Yes – Creo KM IC-314 onlyYes | |
Kodak 800/900 Print Manager | YesNo | |
EFI Fiery Server | Yes | Yes |
Canon (EFI Fiery Server 2) | Yes | No |
HP SmartStream Print Server | Yes | Yes |
Komori IJ Manager | Yes | No |
Konica Minolta IJ Manager | Yes | No |
Konica Minolta ControllerYes | Yes | |
Kodak Nexpress | YesNo | |
Ricoh Total Flow Print Server | Yes | No |
Landa | Yes | No |
Canon PRISMASync | Yes | No |
Managed connections
The following tables list the options for managed-connection submission that are available for different digital press and front-end pairings.
Note: This list of supported presses is updated regularly. For more up-to-date information about supported presses, refer to the Web sites of the press vendors.
...
Connectivity information and preferred submission options for Kodak NexPress, Prosper, Kodak Digimaster, and Kodak Versamark presses with Kodak and Creo Color Server front ends | |
---|---|
Digital press / front end | Submission options |
NexPress S2100/S2500/S3000/M700 with NexPress front end 8.5 (minimum version) or 12 (recommended) | (1) JDF (2) JDF hot folder (2) PDF hot folder |
NexPress S2500/S3000/M700 with Creo Color Server running NexPress Vcs front end 10.231 | (1) JDF (2) JDF hot folder (2) PDF hot folder |
Kodak Prosper Ultra 520 900/Uteco Sapphire EVO Wide with Kodak 900 Print Manager version 1.5 and above Kodak Prosper 1000, 5000, 6000S, 6000 and 7000 with Kodak 800 Print Manager | (1) JDF (2) JDF hot folder (3) PDF hot folder |
Digimaster with Digimaster front end 7.01 Note: Integration with Kodak SmartBoard Document Mastering software is required in order to create SmartBoard job tickets and to enable connectivity. | (1) LPR |
Versamark VL2000 with Creo Color Server running Print Manager 710 | (1) JDF (2) JDF hot folder (2) PDF hot folder |
...