Page History

Note: AppleTalk is not supported by Microsoft Windows Server 2008. It may still be installed using a third-party AppleTalk protocol software, and used for font downloading, AFP sharing, and setting up virtual printers.

1. From the Configure menu, select Virtual Printers.
2. In the New Virtual Printer dialog box in the Pick a Refine Process Template list, select a Refine to PDF or output from PostScript process template. You can only modify the attached process template settings via the Configure menu Process Templates option.
3. In the Name box, type the name of the virtual printer to be able to identify it from your Apple Talk Chooser or SMB Finder (Mac OS X only), or Add Printer (Windows only). For example, Prinergy Evo PDF printer. Defaults to the attached process template name. The Name box defaults to the selected process template name.
   Important: If you are going to print from a Windows-based computer via the Prinergy Evo virtual printer, this name must be in ASCII characters (for example, western language characters) and contain no spaces. If you create the name using UNICODE characters (for example, Chinese characters) and print from a Windows-based computer to Prinergy Evo software, the file will not print. This is a limitation in the Windows operating system.
4. Select Apple Talk to publish the virtual printer as an AppleTalk print driver.
5. click Browse to select a location to save the processed file.
   The folder location becomes the default folder location in the selected process template Processed File Preferences section, if you select the Send Processed Files to Default Location option.
   If you select Send Processed Files To: check box in the process template, Processed File Preferences section, this location overrides any locations you selected in the New Virtual Printer dialog box.
   Important: The Prinergy Evo server computer must have read, write, and modify privileges on the folder from which you submit input files to, and save output files from Prinergy Evo software. Kodak recommends that your input files are located in the shared JobData folder on the Prinergy Evo server computer and you mount them from your Prinergy Evo client computer.
6. Click Create.
   Prinergy Evo software creates the AppleTalk virtual printer.
7. From your Print Center (Macintosh OS X), add the Apple Talk print driver, using the <SystemFolder>/Prinergy Refiner PPD that you installed when you installed the Prinergy Evo Client.
8. Perform one of the following:
   

   Children Display

   
   
   

注： Microsoft Windows Server 2008 不支持 AppleTalk。 它仍然可通过使用第三方 AppleTalk 协议软件来进行安装，并用于字体下载、AFP 共享以及设置虚拟打印机。

1. 从配置菜单中，选择虚拟打印机。
2. 在"新建虚拟打印机"对话框的选择精炼处理模板列表中，选择精炼为 PDF 处理模板或从 PostScript 输出处理模板。只有通过配置菜单中的处理模板选项才能修改附加的处理模板设置。
3. 在名称框中，键入虚拟打印机的名称，以便在 Apple Talk 选配器、SMB Finder（仅 Mac OS X）或添加打印机（仅 Windows）中确认该打印机。 例如，Prinergy Evo PDF 打印机。 默认名称为附加的处理模板名称。 名称框默认为所选处理模板的名称。
   重要： 如果要利用 Prinergy Evo 虚拟打印机从 Windows 计算机进行打印，名称必须使用 ASCII 字符（例如，西方语言字符）且不包含空格。 如果使用 UNICODE 字符（例如，中文字符）创建名称，并从 Windows 计算机打印到 Prinergy Evo 软件，文件将不会打印。 这是 Windows 操作系统的一个缺陷。
4. 选择 Apple Talk 将虚拟打印机作为 AppleTalk 打印驱动程序发布。
5. 单击浏览，选择要保存已处理文件的位置。
   如果选择发送已处理文件至默认位置选项，该文件夹位置则成为已处理文件首选项部分所选处理模板中的默认文件夹位置。
   如果在处理模板的已处理文件首选项部分选择发送已处理文件至：复选框，则该位置会覆盖您在"新建虚拟打印机"对话框中设置的任何位置。
   重要： Prinergy Evo 服务器计算机必须对向 Prinergy Evo 提交输入文件并保存 Prinergy Evo 输出文件的文件夹有读、写和修改的权限。 Kodak 建议将输入文件放在 Prinergy Evo 服务器计算机上的 JobData 共享文件夹中，并从 Prinergy Evo 客户机上建立这些文件。
6. 单击创建。
   Prinergy Evo 软件即创建 AppleTalk 虚拟打印机。
7. 从打印中心 (Macintosh OS X)，使用在安装 Prinergy Evo 客户端时安装的 <SystemFolder>/Prinergy Refiner PPD，添加 Apple Talk 打印驱动程序。
8. 执行以下操作之一：
   

   Children Display