Sv translation | ||
---|---|---|
| ||
Enable this section if you are generating PDFs to a digital printer and you want to use a JDF file to communicate with the printer. Job Settings Number of Copies Type the number of copies to be printed. Job Name (See About custom file naming) Device Selection Select a Device Type From the Select a Device Type list, select a digital printer controller. Send Files to Printer using Select Network Copy or HTTP Protocol to determine how the content file is referenced in the JDF file that is copied to the hot folder on the digital printer. PDF Path Type the path to the folder where Prinergy creates the PDF for the printer to output. You can also click Browse and locate the folder. PDF File Name (See About custom file naming) JDF Path Type the path to the folder where Prinergy will create the JDF file. You can also click Browse and locate the folder. JDF File Name (See About custom file naming) Select JDF Templates Select Named Features Use this field only as instructed by the Prinergy Digital Print Installation and Configuration Guide. Select JDF File Click the Browse button to locate the appropriate template. If you do not specify a template, the default template is used. Media Selection Use Default Media Selection Select this option to use the default options displayed. Otherwise, click Use Selected Media to customize the settings. Use Selected Media Select this option to customize weight, size, and other aspects of the media. Weight Type the weight of the paper stock that the job is to be printed on. If the paper set on the printer has a range of weights (for example 81-105 gsm), any number within that range matches. Color Select the color of the paper stock that the job is to be printed on. Coatings Select a coating such as Glossy or Satin to indicate that the paper stock is coated, or select None to indicate that the paper stock is uncoated. Size Select the size of the paper stock that the job is to be printed on. Choose from:
This option affects only the paper size that the digital printer uses. It does not affect the PDF that Prinergy sends to the digital printer. To change the size of the PDF sent by Prinergy, use the Layout section of the imposition output process template (or layout output process template in Prinergy Powerpack). Width Type the width of the paper stock that the job is to be printed on. If the paper set on the printer has a range of widths, any number within that range matches. Height Type the height of the paper stock that the job is to be printed on. If the paper set on the printer has a range of heights, any number within that range matches. Media Handling Use Default Media Handling Select this option to use the default options displayed. Otherwise, click Use Selected Media Handling to customize the settings. Use Selected Media Handling Select this option to customize duplexing and collation settings. Duplexing Select an item that controls whether the printer prints on both sides of the paper. Choose from:
Collation Select either Sheet or None to control whether the printer collates the output. Device Specific Settings Device Name Type the name of the digital printer or the print server. For example, type Queue Type the name of the print queue. For example, type Device Type Type the type and version of the digital printer to assist Xerox FreeFlow Print Manager in translating the JDF. For example, type Protocol Type the name of the print protocol that the digital printer uses. Xerox FreeFlow Print Manager translates the JDF into this print protocol. For example, type Job Spec Type the name of a pre-defined workflow. |
Sv translation | ||
---|---|---|
| ||
Activez cette section si vous générez des fichiers PDF vers une imprimante numérique et que vous souhaitez utiliser un fichier PDF pour communiquer avec l'imprimante. Paramètres des travaux Nombre de copies Entrez le nombre de copies à imprimer. Nom du travail (Reportez-vous à la section About custom file naming) Chemins de périphériques Sélectionner un type de périphérique À partir de la liste Type de périphérique, sélectionnez un contrôleur d'imprimante numérique. Envoyer les fichiers à l'imprimante en utilisant Sélectionnez Copie de réseau ou Protocole HTTP pour déterminer comment le fichier de contenu est référencé dans le fichier JDF copié dans le Hot Folder de l'imprimante numérique. Chemin PDF Tapez le chemin du dossier dans lequel Prinergy crée le fichier PDF qui sera sorti sur l'imprimante. Vous pouvez aussi cliquer sur Parcourir et rechercher le dossier. Nom de fichier PDF (Reportez-vous à la section About custom file naming) Chemin JDF Tapez le chemin du dossier dans lequel Prinergy va créer le fichier JDF. Vous pouvez aussi cliquer sur Parcourir et rechercher le dossier. Nom de fichier JDF (Reportez-vous à la section About custom file naming) Sélectionnez les modèles JDF Sélectionner les fonctions nommées Utilisez ce champ uniquement comme indiqué dans le Guide d'installation et de configuration de Prinergy Digital Print. Sélectionner le fichier JDF Cliquez sur le bouton Parcourir pour localiser le modèle approprié. Le modèle par défaut est utilisé si vous n'en spécifiez aucun. Sélection de support Utiliser la gestion des supports par défaut Sélectionnez cette option pour utiliser les options par défaut affichées. Sinon, cliquez sur Utiliser la gestion des supports sélectionnés pour personnaliser les paramètres. Utiliser les supports sélectionnés Sélectionnez cette option pour personnaliser le grammage, la taille, ainsi que d'autres caractéristiques du support. Grammage Sélectionnez le grammage du papier sur lequel le travail doit être imprimé. Si le grammage du papier dans l'imprimante varie (par exemple, s'il est compris entre 81 et 105 g/m²), vous pouvez utiliser n'importe quel nombre de cette plage. Couleur Sélectionnez la couleur du papier sur lequel le travail doit être imprimé. Couchés Sélectionnez un type de couché tel que Brillant ou Satiné pour indiquer que le stock de papier est couché ou sélectionnez Aucun pour indiquer qu'il est non-couché. Taille Sélectionnez le format du papier sur lequel le travail doit être imprimé. Choisissez parmi les options suivantes :
Cette option affecte uniquement le format du papier utilisé par l'imprimante numérique. Le PDF envoyé par Prinergy à l'imprimante numérique n'est pas affecté. Pour modifier la taille du PDF envoyé par Prinergy, utilisez la section Mise en page du modèle de processus de sortie d'imposition (ou du modèle de processus de sortie de mise en page dans Prinergy Powerpack). Largeur Sélectionnez la largeur du papier sur lequel le travail doit être imprimé. Si la largeur du papier dans l'imprimante varie, vous pouvez utiliser n'importe quel nombre de cette plage. Hauteur Sélectionnez la hauteur du papier sur lequel le travail doit être imprimé. Si la hauteur du papier dans l'imprimante varie, vous pouvez utiliser n'importe quel nombre de cette plage. Gestion des supports Utiliser la gestion des supports par défaut Sélectionnez cette option pour utiliser les options par défaut affichées. Sinon, cliquez sur Utiliser la gestion des supports sélectionnés pour personnaliser les paramètres. Utiliser la gestion des supports sélectionnés Sélectionnez cette option pour personnaliser les paramètres de recto-verso et d'assemblage. Recto verso Sélectionnez un élément contrôlant si l'imprimante imprime sur les deux côtés du papier. Choisissez parmi les options suivantes :
Interclassement Sélectionnez Feuille ou Aucun pour contrôler si l'imprimante assemble la sortie. Paramètres spécifiques au périphérique Nom du périphérique Entrez le nom exact de l'imprimante numérique ou du serveur d'impression. Par exemple, tapez File d'attente Tapez le nom de la file d'imprimante. Par exemple, tapez Type de périphérique Entrez le type et la version de l'imprimante numérique pour aider Xerox FreeFlow Print Manager à convertir le format JDF. Par exemple, tapez Protocole Entrez le nom du protocole d'impression utilisé par l'imprimante numérique. Xerox FreeFlow Print Manager convertit le format JDF dans ce protocole. Par exemple, tapez Spécifications du travail Entrez le nom d'un flux de production prédéfini. |
Sv translation | ||
---|---|---|
| ||
如果要将 PDF 生成到数字打印机以及要使用 JDF 文件与打印机通信,则可以启用此部分。 作业设置 份数 输入要打印的份数。 作业名 (请参见About custom file naming) 设备选择 选择设备类型 从选择设备类型列表中,选择数字打印机控制器。 使用以下方式将文件发送到打印机 选择网络复制或 HTTP 协议确定如何在 JDF 文件中引用要复制到数字打印机上的热文件夹的内容文件。 PDF 路径 键入印能捷创建 PDF(用于在打印机上输出)的文件夹的路径。也可以单击浏览然后找到文件夹。 PDF 文件名称 (请参见About custom file naming) JDF 路径 键入印能捷将创建 JDF 文件的文件夹的路径。也可以单击浏览然后找到文件夹。 JDF 文件名 (请参见About custom file naming) 选择 JDF 模板 选择已命名功能 请完全按照《印能捷数字印刷安装和配置指南》中的指示使用此字段。 选择 JDF 文件 单击浏览按钮查找相应的模板。如果不指定模板,将使用默认模板。 版材选择 使用默认的版材处理 选择此选项将使用所显示的默认选项。否则,单击使用所选的版材处理来自定义设置。 使用所选的版材 选择该选项自定义重量、大小和版材的其它方面。 重量 键入要打印作业的纸料的重量。 如果打印机上的纸张设置又一系列重量(例如 81-105 gsm),该范围内的任何数字均匹配。 颜色 选择要在其上打印作业的纸张承印物的颜色。 图层 选择光面或蜡光之类的涂层表示纸张承印物使用涂层,或选择无表示纸张承印物未使用涂层。 大小 选择要在其上打印作业的纸张承印物的大小。可选择:
宽度 输入要在其上打印作业的纸张承印物的宽度。如果在打印机上设置的纸张有宽度范围,则该范围内的任何数值都应符合要求。 Height(高度) 输入要在其上打印作业的纸张承印物的高度。如果在打印机上设置的纸张有高度范围,则该范围内的任何数值都应符合要求。 版材处理 使用默认的版材处理 选择此选项将使用所显示的默认选项。否则,单击使用所选的版材处理来自定义设置。 使用所选的版材处理 选择该选项自定义双面和逐份打印设置。 双面印刷 选择用于控制打印机是否在纸张上进行双面打印的项。可选择:
帖标 选择印张或无可控制打印机是否整理输出。 特定于设备的设置 设备名称 键入数字打印机或打印服务器的名称。例如,键入 队列 键入打印队列的名称。例如,键入 设备类型 键入用于协助 Xerox FreeFlow Print Manager 转换 JDF 的数字打印机的类型和版本。例如,键入 协议 键入数字打印机使用的打印协议的名称。Xerox FreeFlow Print Manager 将 JDF 转换为该打印协议。例如,键入 作业说明 输入预定义工作流程的名称。 |
Sv translation | ||
---|---|---|
| ||
Aktivieren Sie diesen Bereich, wenn Sie PDF-Dateien für einen Digitaldrucker erzeugen und eine JDF-Datei zur Kommunikation mit dem Drucker einsetzen möchten. Job-Einstellungen Anzahl der Kopien Geben Sie die Anzahl der Kopien ein, die gedruckt werden sollen. Job-Name (Siehe About custom file naming) Geräteauswahl Wählen Sie einen Gerätetyp aus Wählen Sie in der Liste Wählen Sie einen Gerätetyp aus einen Digitaldrucker-Controller aus. Dateien an Drucker senden mit Geben Sie durch Auswahl der Option Netzwerkkopie oder HTTP-Protokoll an, wie die JDF-Datei, die in den Hot Folder auf dem Digitaldrucker kopiert wird, auf die Inhaltsdatei verweist. PDF-Pfad Geben Sie den Pfad zu dem Ordner an, in dem Prinergy die PDF-Datei erstellt, die der Drucker ausgeben soll. Oder klicken Sie auf Durchsuchen, um den Ordner zu suchen. PDF-Dateiname (Siehe About custom file naming) JDF-Pfad Geben Sie den Pfad zu dem Ordner an, in dem Prinergy die JDF-Datei erstellt. Oder klicken Sie auf Durchsuchen, um den Ordner zu suchen. JDF-Dateiname (Siehe About custom file naming) JDF-Vorlagen auswählen Benannte Funktionen auswählen Verwenden Sie dieses Feld nur gemäß den Anweisungen im Prinergy Digital Print – Installations- und Konfigurationshandbuch. JDF-Datei auswählen Klicken Sie auf die Schaltfläche Durchsuchen, um die passende Vorlage zu suchen. Wenn Sie keine Vorlage angeben, wird die Standardvorlage verwendet. Medienauswahl Standardmedienbehandlung verwenden Mithilfe dieser Option können Sie die angezeigten Standardoptionen verwenden. Klicken Sie andernfalls auf Ausgewählte Medienbehandlung verwenden, um die Einstellungen anzupassen. Ausgewählte Medien verwenden Wählen Sie diese Option aus, um Gewicht, Größe und andere Aspekte der Medien anzupassen. Gewicht Geben Sie das Gewicht des Papiermaterials ein, auf dem der Job gedruckt werden soll. Wenn für den Papiersatz im Drucker ein Gewichtbereich (z. B. 81 – 105 g) angegeben ist, kann jeder Wert innerhalb dieses Bereiches angegeben werden. Farbe Wählen Sie die Farbe des Papiermaterials aus, auf dem der Job gedruckt werden soll. Beschichtungsfarben Wählen Sie als Beschichtung z. B. Glänzend oder Seidenglanz für beschichtetes Papiermaterial bzw. Keine für nicht beschichtetes Papier. Größe Wählen Sie das Format des Papiermaterials aus, auf dem der Job gedruckt werden soll. Folgendes steht zur Auswahl:
Diese Option hat nur Auswirkungen auf das Papierformat, das der Digitaldrucker verwendet. Sie wirkt sich nicht auf die PDF-Datei aus, die Prinergy an den Digitaldrucker sendet. Wenn Sie das Format der von Prinergy gesendeten PDF ändern möchten, verwenden Sie den Bereich Layout der Prozessvorlage „Ausgabe von Ausschießschema" (oder der Prozessvorlage „Layoutausgabe" bei Prinergy Powerpack). Breite Wählen Sie die Breite des Papiermaterials aus, auf dem der Job gedruckt werden soll. Wenn der Papiersatz im Drucker unterschiedliche Breiten aufweist, kann jeder Wert innerhalb dieses Bereiches angegeben werden. Höhe Wählen Sie die Höhe des Papiermaterials aus, auf dem der Job gedruckt werden soll. Wenn der Papiersatz im Drucker unterschiedliche Höhen aufweist, kann jeder Wert innerhalb dieses Bereiches angegeben werden. Medienbehandlung Standardmedienbehandlung verwenden Mithilfe dieser Option können Sie die angezeigten Standardoptionen verwenden. Klicken Sie andernfalls auf Ausgewählte Medienbehandlung verwenden, um die Einstellungen anzupassen. Ausgewählte Medienbehandlung verwenden Wählen Sie diese Option aus, um die Einstellungen für die doppelseitige und die sortierte Ausgabe anzupassen. Doppelseitig Wählen Sie ein Element aus, das einstellt, ob der Drucker doppelseitig druckt. Folgendes steht zur Auswahl:
Sortierung Wählen Sie Bogen oder Keiner, um einzustellen, ob der Drucker die Ausgabe sortiert. Gerätespezifische Einstellungen Gerätename Geben Sie hier den Namen des Digitaldruckers bzw. des Druckservers ein. Geben Sie beispielsweise Warteschlange Geben Sie hier den Namen der Druckwarteschlange an. Geben Sie beispielsweise Gerätetyp Geben Sie hier Typ und Version des Digitaldruckers ein, um Xerox FreeFlow Print Manager bei der Übersetzung der JDF-Datei zu unterstützen. Geben Sie beispielsweise Protokoll Geben Sie den Namen des vom Digitaldrucker verwendeten Druckprotokolls ein. Xerox FreeFlow Print Manager übersetzt die JDF-Datei in dieses Druckprotokoll. Geben Sie beispielsweise Job-Spezifikation Geben Sie den Namen eines vordefinierten Workflows ein. |
Sv translation | ||
---|---|---|
| ||
PDF をデジタル プリンタに出力する際に、JDF ファイルを使用してプリンタと通信するには、このセクションをオンにしてください。 ジョブ設定 部数 印刷する部数を入力します。 ジョブ名 (About custom file namingを参照) デバイスの選択 デバイスの種類を選択 デバイスの種類を選択リストで、デジタル プリンタの プリンタにファイルを送信する方法 ネットワーク コピーまたはHTTP プロトコルを選択して、デジタル プリンタ用のホット フォルダにコピーする JDF ファイルで、ページ ファイルを参照する方法を決定します。 PDF パス Prinergy がプリンタで出力する PDF を作成するフォルダへのパスを入力します。参照をクリックして、フォルダを指定することもできます。 PDF ファイル名 (About custom file namingを参照) JDF パス Prinergy が JDF ファイルを作成するフォルダへのパスを入力します。参照をクリックして、フォルダを指定することもできます。 JDF ファイル名 (About custom file namingを参照) JDF テンプレートを選択 選択する機能名 このフィールドは、Prinergy Digital Print Installation and Configuration Guide(Prinergy Digital Print のインストールと設定ガイド)の指示に従って使用します。 JDF ファイルの選択 参照ボタンをクリックして適切なテンプレートを指定します。テンプレートを指定しない場合、デフォルトのテンプレートが使用されます。 メディアの選択 デフォルトのメディアを使用 表示されたデフォルトのオプションを使用するには、このオプションを選択します。または、メディア処理を選択をクリックして、設定をカスタマイズします。 メディアを選択 このオプションを選択すると、メディアの米坪量やサイズなどをカスタマイズできます。 重量 ジョブを印刷する用紙の坪量を入力します。 プリンタに設定された用紙の坪量に範囲(81-105 gsm など)がある場合、範囲内の任意の数値に一致します。 カラー ジョブを印刷する用紙のカラーを選択します。 コーティング 用紙がコーティングされていることを指定するには、光沢またはサテン光沢紙を選択します。また、用紙がコーティングされていないことを指定するにはなしを選択します。 サイズ ジョブを印刷する用紙のサイズを選択します。以下から選択します。
このオプションは、デジタル プリンタが使用している用紙サイズにのみ影響します。 Prinergy からデジタル プリンタに送信される PDF には影響しません。Prinergy から送られた PDF のサイズを変更するには、面付け出力プロセス テンプレート(または Prinergy Powerpack のレイアウト出力プロセス テンプレート)のレイアウトセクションを使用します。 幅 ジョブを印刷する用紙の幅を入力します。プリンタに設定された用紙の幅に範囲がある場合、範囲内の任意の数値が一致します。 高さ ジョブを印刷する用紙の高さを入力します。プリンタに設定された用紙の高さに範囲がある場合、範囲内の任意の数値が一致します。 メディアの処理 デフォルトのメディアを使用 表示されたデフォルトのオプションを使用するには、このオプションを選択します。または、メディア処理を選択をクリックして、設定をカスタマイズします。 メディア処理を選択 このオプションを選択すると、面付け型式と丁合いの設定をカスタマイズできます。 面付け型式 項目を選択して、用紙の両面に印刷するかどうかを指定します。以下から選択します。
丁合い シートまたはなしを選択して、丁合いして出力するどうかを指定します。 デバイス固有の設定 デバイス名 デジタル プリンタまたはデジタル サーバーの名前を入力します。たとえば、 キュー 印刷キューの名前を入力します。たとえば、 デバイスの種類 Xerox FreeFlow Print Manager の JDF 変換をサポートするデジタル プリンタのタイプとバージョンを入力します。たとえば、 プロトコル デジタル プリンタが使用する印刷プロトコルの名前を入力します。Xerox FreeFlow Print Manager では、JDF をこの印刷プロトコルに変換します。たとえば、 ジョブの仕様 あらかじめ定義されたワークフロー名を入力します。 |
Sv translation | ||
---|---|---|
| ||
Habilite esta sección cuando quiera generar archivos PDF en una impresora digital y desee utilizar un archivo JDF para comunicarse con la impresora. Configuración del trabajo Número de copias Escriba el número de copias que desea imprimir. Nombre del trabajo (Consulte About custom file naming) Rutas del dispositivo Seleccionar un tipo de dispositivo En la lista Seleccione un tipo de dispositivo, seleccione un controlador de impresora digital. Enviar archivos a la impresora mediante Seleccione Copia de red o Protocolo HTTP para determinar cómo se hace referencia al archivo de contenido en el archivo JDF que se copia a la hot folder de la impresora digital. Ruta de PDF Escriba la ruta a la carpeta donde Prinergy deba crear el archivo PDF cuya salida se deba generar en la impresora. Puede también hacer clic en Examinar para localizar la carpeta. Nombre de archivo PDF (Consulte About custom file naming) Ruta de JDF Escriba la ruta a la carpeta donde Prinergy deba crear el archivo JDF. Puede también hacer clic en Examinar para localizar la carpeta. Nombre de archivo JDF (Consulte About custom file naming) Seleccionar plantillas JDF Seleccionar funciones con nombre Utilice este campo únicamente como se indica en la Guía de instalación y configuración de Prinergy Digital Print. Seleccionar archivo JDF Haga clic en el botón Examinar para buscar una plantilla adecuada. Si no especifica una plantilla, se usará la predeterminada. Selección de material de impresión Utilizar tratamiento del material de impresión predeterminado Seleccione esta opción para utilizar las opciones mostradas de forma predeterminada. De lo contrario, haga clic en Utilizar tratamiento del material de impresión seleccionado para personalizar la configuración. Utilizar material de impresión seleccionado Seleccione esta opción para personalizar el peso, el tamaño y otros aspectos de los medios de impresión. Peso Introduzca el peso del stock de papel en el que se vaya a imprimir el trabajo. Si el papel definido en la impresora tiene un intervalo de pesos (81-105 g/m2, por ejemplo), se podrá introducir cualquier número incluido en ese intervalo. Color Seleccione el color del stock de papel en el que se vaya a imprimir el trabajo. Revestimientos Seleccione un revestimiento como Brillante o Satinado para indicar que el material del papel está revestido o seleccione Ninguno para indicar que no lo está. Tamaño Seleccione el tamaño del stock de papel en el que se vaya a imprimir el trabajo. Seleccione entre:
Esta opción solo afecta al tamaño del papel que utiliza la impresora digital. No influye en el PDF que Prinergy envía a la impresora. Para cambiar el tamaño del PDF enviado por Prinergy, utilice la sección Diseño de la plantilla de proceso de prueba de imposición (o plantilla de proceso de salida de diseño en Prinergy Powerpack). Anchura Escriba la anchura del stock de papel en el que se vaya a imprimir el trabajo. Si el papel definido en la impresora tiene un intervalo de anchuras, se puede escribir cualquier número incluido en ese intervalo. Altura Escriba la altura del stock de papel en el que se vaya a imprimir el trabajo. Si el papel definido en la impresora tiene un intervalo de alturas, se puede escribir cualquier número incluido en ese intervalo. Manipulación del material Utilizar tratamiento del material de impresión predeterminado Seleccione esta opción para utilizar las opciones mostradas de forma predeterminada. De lo contrario, haga clic en Utilizar tratamiento del material de impresión seleccionado para personalizar la configuración. Utilizar tratamiento del material de impresión seleccionado Seleccione esta opción para personalizar las opciones de la impresión a doble cara y del alzado. Trabajo a doble cara Seleccione un elemento para controlar si la impresora debe imprimir en ambas caras del papel. Seleccione entre:
Alzado Seleccione Hojao Ninguno para controlar si debe alzarse la salida en la impresora. Configuración específica de dispositivo Nombre del dispositivo Escriba el nombre de la impresora digital o del servidor de impresión. Por ejemplo, escriba Cola Escriba el nombre de la cola de impresión. Por ejemplo, escriba Tipo de dispositivo Escriba el tipo y la versión de la impresora digital que se utilizará con Xerox FreeFlow Print Manager para convertir JDF. Por ejemplo, escriba Protocolo Escriba el nombre del protocolo de impresión que utiliza la impresora digital. Xerox FreeFlow Print Manager convierte el formato JDF a este protocolo de impresión. Por ejemplo, escriba Especificaciones de trabajo Escriba el nombre de un flujo de trabajo predefinido. |
Sv translation | ||
---|---|---|
| ||
Enable this section if you are generating PDFs to a digital printer and you want to use a JDF file to communicate with the printer. Job Settings Number of Copies Type the number of copies to be printed. Job Name (See About custom file naming) Device Selection Select a Device Type From the Select a Device Type list, select a digital printer controller. Send Files to Printer using Select Network Copy or HTTP Protocol to determine how the content file is referenced in the JDF file that is copied to the hot folder on the digital printer. PDF Path Type the path to the folder where Prinergy creates the PDF for the printer to output. You can also click Browse and locate the folder. PDF File Name (See About custom file naming) JDF Path Type the path to the folder where Prinergy will create the JDF file. You can also click Browse and locate the folder. JDF File Name (See About custom file naming) Select JDF Templates Select Named Features Use this field only as instructed by the Prinergy Digital Print Installation and Configuration Guide. Select JDF File Click the Browse button to locate the appropriate template. If you do not specify a template, the default template is used. Media Selection Use Default Media Selection Select this option to use the default options displayed. Otherwise, click Use Selected Media to customize the settings. Use Selected Media Select this option to customize weight, size, and other aspects of the media. Weight Type the weight of the paper stock that the job is to be printed on. If the paper set on the printer has a range of weights (for example 81-105 gsm), any number within that range matches. Color Select the color of the paper stock that the job is to be printed on. Coatings Select a coating such as Glossy or Satin to indicate that the paper stock is coated, or select None to indicate that the paper stock is uncoated. Size Select the size of the paper stock that the job is to be printed on. Choose from:
This option affects only the paper size that the digital printer uses. It does not affect the PDF that Prinergy sends to the digital printer. To change the size of the PDF sent by Prinergy, use the Layout section of the imposition output process template (or layout output process template in Prinergy Powerpack). Width Type the width of the paper stock that the job is to be printed on. If the paper set on the printer has a range of widths, any number within that range matches. Height Type the height of the paper stock that the job is to be printed on. If the paper set on the printer has a range of heights, any number within that range matches. Media Handling Use Default Media Handling Select this option to use the default options displayed. Otherwise, click Use Selected Media Handling to customize the settings. Use Selected Media Handling Select this option to customize duplexing and collation settings. Duplexing Select an item that controls whether the printer prints on both sides of the paper. Choose from:
Collation Select either Sheet or None to control whether the printer collates the output. Device Specific Settings Device Name Type the name of the digital printer or the print server. For example, type Queue Type the name of the print queue. For example, type Device Type Type the type and version of the digital printer to assist Xerox FreeFlow Print Manager in translating the JDF. For example, type Protocol Type the name of the print protocol that the digital printer uses. Xerox FreeFlow Print Manager translates the JDF into this print protocol. For example, type Job Spec Type the name of a pre-defined workflow. |