Sv translation | ||
---|---|---|
| ||
The Create Dummy Artwork dialog box lets you specify a name and the trim box dimensions for an artwork that is still in the planning stages. You can use this placeholder when the customer artwork is not available or if the artwork will be added by a workflow system downstream. The placeholder can be swapped later in the production cycle with the 'live' artwork.
Tip: This artwork can now be used to create a Step-and-Repeat. If using a Prinergy Workflow, print the layout to PJTF - Kodak Prinergy. The layout with the dummy artwork can be imported and the live production artwork can then be assigned to the artwork set when it is refined. |
Sv translation | ||
---|---|---|
| ||
Im Dialogfeld „Mustervorlage erstellen“ können Sie einen Namen und die Maße des Beschnittrahmens für eine Vorlage angeben, die sich noch in der Planung befindet. Sie können diesen Platzhalter verwenden, wenn keine Kundenvorlage verfügbar ist oder die Vorlage später von einem Workflow-System hinzugefügt wird. Der Platzhalter kann später im Produktionszyklus gegen eine „Live“-Vorlage eingetauscht werden.
Tipp: Diese Vorlage kann zum Erstellen eines Mehrfachnutzens verwendet werden. Wenn Sie einen Prinergy Workflow verwenden, drucken Sie das Layout in PJTF – Kodak Prinergy. Das Layout mit der Mustervorlage kann importiert und anschließend die „Live“-Druckvorlage während des Refining-Vorgangs in der Produktion zugewiesen werden. |
Sv translation | ||
---|---|---|
| ||
El cuadro de diálogo Crear gráfico ficticio permite especificar un nombre y las dimensiones del cuadro de recorte para un gráfico que todavía se encuentre en las fases de planificación. Este marcador se puede utilizar cuando no se dispone de los gráficos del cliente o si los gráficos se van a introducir más adelante mediante un sistema de flujo de trabajo. El marcador se puede cambiar por un gráfico "en tiempo real" más adelante en el ciclo de producción.
Sugerencia: Ahora, este gráfico puede utilizarse para crear un modelo de avance y repetición. Si utiliza Prinergy Workflow, imprima el diseño a PJTF - Kodak Prinergy. El diseño que contiene el gráfico ficticio se puede importar y, a continuación, se puede asignar el gráfico de producción en tiempo real al conjunto de materiales gráficos durante la fase de afinado. |
Sv translation | ||
---|---|---|
| ||
La boîte de dialogue Créer une mini-maquette permet de spécifier un nom et les dimensions de la zone de rognage pour une maquette qui est toujours au stade de la planification. Vous pouvez utiliser cet espace réservé lorsque la maquette du client n'est pas disponible ou que la maquette va être ajoutée par un système de flux de travail en aval. L'espace réservé peut être remplacé plus tard dans le cycle de production par la maquette réelle.
Conseil : désormais, cette maquette peut être utilisée pour créer une copie en répétition. Si vous utilisez Prinergy Workflow, imprimez la mise en page au format PJTF - Kodak Prinergy. La mise en page avec les mini-maquettes peut être importée, et la maquette de production réelle peut ensuite être attribuée au jeu de maquettes lorsqu'elle est raffinée. |
Sv translation | ||
---|---|---|
| ||
La finestra di dialogo Crea elemento grafico fittizio consente di specificare un nome e le dimensioni del riquadro di rifilo di un elemento grafico ancora nelle fasi di pianificazione. È possibile usare questo segnaposto quando l'elemento grafico del cliente non è disponibile oppure se l'elemento grafico verrà aggiunto da un downstream di sistema di flusso di lavoro. Il segnaposto può essere sostituito in un secondo momento nel ciclo di produzione con l'elemento grafico "reale".
Suggerimento: è possibile usare questo elemento grafico per creare una stampa multipla. Se si utilizza Prinergy Workflow, stampare il layout su PJTF - Kodak Prinergy. Il layout con l'elemento grafico fittizio può essere importato e l'elemento grafico di produzione reale può essere assegnato all'elemento grafico, dopo che è stato rifinito. |
Sv translation | ||
---|---|---|
| ||
[ダミー アートワークの作成]ダイアログ ボックスを使用して、計画段階のアートワークの名前およびトリミング ボックスのサイズを指定できます。 顧客のアートワークを使用できない場合や、アートワークが後工程のワークフロー システムで追加される場合に、このプレースホルダを使用できます。 このプレースホルダは、後にプロダクション サイクルで「実際の」アートワークに置換できます。
ヒント:このアートワークを使用してステップ&リピートを作成できるようになります。 Prinergy Workflow を使用している場合は、レイアウトを PJTF - Kodak Prinergy に出力します。 ダミー アートワークが含まれるレイアウトをインポートし、リファインするときに、実際のプロダクション アートワークをアートワーク セットに割り当てることができます。 |
Sv translation | ||
---|---|---|
| ||
您可以使用“创建虚拟页面”对话框,为仍处于计划阶段的页面指定名称和净尺寸框尺寸。 当客户页面不可用或者通过下游工作流程系统添加页面时,您可以使用此占位符。 占位符随后可以在生产周期与“实时”页面进行交换。
提示:此页面现在可用于创建多重拼贴。 如果使用的是印能捷工作流程,请将版式打印至 PJTF - Kodak Prinergy。 可以导入具有虚拟页面的版式,当实时生产页面经过精炼时,可以将其分配到页面组。 |