Sv translation | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||
Prinergy servers and workstations must meet specific hardware and software requirements to be supported with this version of Prinergy. Supported serversPrinergy Workflow 10.0 requires Microsoft Windows Server 2016, or Windows Server 2019 on one of the following Dell platforms: Windows 2016 or Windows 2019
Virtual Environments:Prinergy is supported on the following virtual platforms: NOTE: AMD CPUs are NOT supported
Important: For VOE (Virtual Operating Environment), Kodak does not provide the license for Microsoft operating system. The licenses can be purchased through a Microsoft reseller of your choice.Memory requirementsPrinergy primary servers and Hot Standby servers require a minimum of 12 GB RAM. Prinergy secondary servers and render stations require a minimum of 8 GB RAM. Storage requirementsPrinergy Workflow 10.0 requires system drives with a minimum of 146 GB storage space (with at least 10 GB free space) on primary servers and system drives with a minimum of 73 GB storage space (with at least 10 GB free space) on secondary servers and render stations. If upgrading from a version of Prinergy with Oracle 12.2 or earlier integrated, make sure that during the upgrade you have at least 3x the amount of disk space currently occupied by the database ( Hot Standby (EPM) serversPrinergy Workflow 10.0 supports Carbonite Double-Take software 8.2 / 8.4 under Windows 2016 and Windows 2019. Double-Take upgrades are performed by a Kodak engineer during the operating system upgrade. |
Sv translation | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||
| DOCL:de_tr | DOCL:de_tr | Prinergy-Server und Workstations müssen bestimmte Hardware- und Softwarevoraussetzungen erfüllen, damit sie bei dieser Version von Prinergy unterstützt werden.
Generation 13/14/15 Premium- und High-Performance-Server
| Generation 13/14/15 Performance Plus-Server
|
Unterstützt als Hauptserver, EPM+, Zusatzserver und Render-Station. Beachten Sie, dass High-Performance-Server eine schnellere CPU und schnellere SSD-Systemfestplatten haben. | Unterstützt als Hauptserver, EPM+, Zusatzserver und Render-Station. |
Virtuelle Umgebungen:
Prinergy wird auf den folgenden virtuellen Plattformen unterstützt:
HINWEIS: CPUs von AMD werden NICHT unterstützt
VMware vSphere: | NotizenHinweise |
---|---|
6.0 | Prinergy wurde getestet und funktioniert auf vSphere 6.0. VMware hat die Unterstützung für diese Version jedoch zum 12. März 2020 eingestellt. Obwohl Prinergy weiterhin auf dieser Plattform funktioniert, empfiehlt Kodak DRINGEND ein Upgrade auf eine aktuelle vSphere-Version. Hinweis: Prinergy 9 Prinergy 9.5-Images können nicht auf vSphere ESXi 6.0 bereitgestellt werden. |
6.5 und höher | Unterstützt. VMware vSphere ESXi 6.5, 6.7 und , 7.0 und 8.0 werden empfohlen, um weiterhin Unterstützung von VMware zu erhalten. |
Hyper-V: | NotizenHinweise |
---|---|
2016 | Unterstützte |
2019 | Unterstützte |
2022 | Unterstützte |
Wichtig: Für VOE (Virtual Operating Environment) stellt Kodak keine Lizenz für das Betriebssystem von Microsoft zur Verfügung. Die Lizenzen können über einen Microsoft-Vertriebspartner Ihrer Wahl erworben werden.
Speicheranforderungen
Prinergy-Hauptserver und Hot-Standby-Server erfordern mindestens 12 GB RAM. Prinergy-Zusatzserver und Render-Stationen erfordern mindestens 8 GB RAM.
Speicherplatzanforderungen
Für Prinergy Workflow 9Workflow 10.5 0 sind auf Hauptservern Systemlaufwerke mit mindestens 146 GB Speicherplatz (mit mindestens 10 GB freiem Speicherplatz) und auf Zusatzservern und Render-Stationen Systemlaufwerke mit mindestens 73 GB Speicherplatz (mit mindestens 10 GB freiem Speicherplatz) erforderlich.
Bei einem Upgrade von einer Prinergy-Version mit integriertem Oracle 12.2 oder früher sollten Sie beim Upgrade darauf achten, dass mindestens das 3-Fache des derzeit von der Datenbank (J:\Oracle
) belegten Speicherplatzes auf dem Laufwerk zur Verfügung steht, auf dem die Datenbank installiert ist (Standardlaufwerk J:\Oracle
).
Hot Standby-Server (EPM)
Prinergy Workflow 9Workflow 10.5 0 unterstützt die Carbonite Double-Take-Software 8Software 8.2/8.4 unter Windows 2016 Windows 2016 und Windows 2019Windows 2019. Double-Take-Upgrades werden von einem Kodak-Servicetechniker beim Upgrade des Betriebssystems vorgenommen.
Sv translation | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| includeDOCL:DOCL:zh_tr |
| _tr||||||||||||||||||
印能捷服务器和工作站必须满足特定硬件和软件要求,才能得到此印能捷版本的支持。 支持的服务器印能捷工作流程 910.5 0 要求在下列其中一个 Dell 平台上安装 Microsoft Windows Server 2016 或 Windows Server 2019: Windows 2016 或 Windows 2019
虚拟环境:以下虚拟平台支持印能捷: 注:AMD CPU 不受支持
内存要求印能捷主服务器和热备份服务器至少需要 12 GB RAM。印能捷二级服务器和输出转换站点至少需要 8 GB RAM。
重要提示:对于 VOE(虚拟操作环境),Kodak 不提供 Microsoft 操作系统的许可证。相关许可证可以通过您选择的 Microsoft 经销商购买。内存要求印能捷主服务器和热备份服务器至少需要 12 GB RAM。印能捷二级服务器和输出转换站点至少需要 8 GB RAM。 存储要求印能捷工作流程 910.5 0 的可用空间要求如下:在主服务器上,系统驱动器至少要有 146 GB 存储空间(和至少 10 GB 可用空间),在二级服务器和输出转换站点上,系统驱动器至少要有 73 GB 存储空间(和至少 10 GB 可用空间)。 如果从集成了 Oracle 12.2 或更早版本的印能捷版本升级,请确保在升级过程中,安装数据库的驱动器(默认驱动器 热备份 (EPM) 服务器在 Windows 2016 和 Windows 2019 下,印能捷工作流程 910.5 0 支持 Carbonite Double-Take 软件 8.2/8.4。Double-Take 升级由 Kodak 工程师在操作系统升级过程中执行。 |
Sv translation | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| include
| _tr||||||||||||||||||||
DOCL:es_tr | Los servidores y estaciones de trabajo Prinergy deben cumplir determinados requisitos de hardware y software para ser compatibles con esta versión de Prinergy.
Servidores Generation 13/14/15 Premium y High-Performance
| Servidores Generation 13/14/15 Performance Plus
|
Admitido como servidor principal, EPM+, servidor secundario y estación de procesamiento |
. Tenga en cuenta que los servidores High-Performance tienen una CPU más rápida y discos del sistema SSD. | Admitido como |
servidor principal, EPM+, servidor secundario y estación de procesamiento. |
Entornos virtuales:
Prinergy es compatible con las siguientes plataformas virtuales:
NOTA: Las CPU de AMD NO son compatibles
VMWare Vsphere: | Notas |
---|---|
6.0 | Prinergy se ha probado y funcionará en vSphere 6.0. Sin embargo, VMWare interrumpió la compatibilidad con esta versión a partir del 12 de marzo de 2020. Aunque Prinergy continuará funcionando en esta plataforma, Kodak recomienda ENCARECIDAMENTE actualizar a una versión actual de vSphere. Nota: Las imágenes de Prinergy 9Prinergy 9.5 no se pueden implementar en vSphere ESXi 6.0. |
6.5 y posteriores | Compatible. Se recomienda recomiendan VMWare vSphere ESXi 6ESXi 6.5, 6.7 y 77, 7.0 y 8.0 para seguir recibiendo soporte de VMware. |
Hyper-V: | Notas |
---|---|
2016 | Compatible |
2019 | Compatible |
2022 |
Requisitos de memoria
Compatible |
Importante: Para VOE (Virtual Operating Environment), Kodak no proporciona la licencia para el sistema operativo Microsoft. Las licencias se pueden adquirir a través de un distribuidor de Microsoft de su elección.
Requisitos de memoria
Los servidores de Prinergy principales Los servidores de Prinergy principales y los servidores Hot Standby necesitan un mínimo de 12 GB de RAM. Los servidores de Prinergy secundarios y las estaciones de procesamiento necesitan un mínimo de 8 GB de RAM.
Requisitos de almacenamiento
Prinergy Workflow 910.5 0 requiere unidades de sistema con un mínimo de 146 GB 146 GB de espacio de almacenamiento (con al menos 10 GB 10 GB de espacio disponible) en los servidores principales y unidades de sistema con un mínimo de 73 GB 73 GB de espacio de almacenamiento (con al menos 10 GB 10 GB de espacio disponible) en los servidores secundarios y las estaciones de procesamiento.
Si va a realizar la actualización desde una versión de Prinergy con Oracle 12.2 o anterior integrado, asegúrese de que durante la actualización dispone de al menos el triple de espacio de disco que ocupa actualmente la base de datos (J:\Oracle
) disponible en la unidad en la que está instalada la base de datos (unidad de disco duro predeterminada: J:\Oracle
).
Servidores Hot Standby (EPM)
Prinergy Workflow 9Workflow 10.5 0 es compatible con el software Carbonite Double-Take 8.2 / 8.4 en Windows 2016 y Windows 2019. Un ingeniero de Kodak lleva a cabo las actualizaciones de Double-Take al realizar la actualización del sistema operativo.
Sv translation | ||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||
Include Page |
| _tr|||||||||||||||||||||||||||
Les serveurs et stations de travail Prinergy doivent répondre à des exigences matérielles et logicielles spécifiques pour être compatibles avec cette version de Prinergy. Serveurs pris en chargePrinergy Workflow 9Prinergy Workflow 10.5 0 requiert Microsoft Windows Server 2016 ou Windows Server 2019 sur l'une des plates-formes Dell suivantes : Windows 2016 ou Windows 2019 Serveurs Premium
Environnements virtuels :Prinergy est pris en charge sur les plates-formes virtuelles suivantes : REMARQUE : Les processeurs AMD ne sont PAS pris en charge
Important : Pour l'environnement d'exploitation virtuel (VOE, Virtual Operating Environment), Kodak ne fournit pas la licence pour le système d'exploitation Microsoft. Les licences peuvent être achetées auprès d'un revendeur Microsoft de votre choix.Mémoire requiseAvec les serveurs principaux Prinergy et les serveurs Hot Standby, au minimum 12 Go de mémoire RAM sont requis. Avec les serveurs secondaires et stations de rendu Prinergy, au minimum 8 Go de mémoire RAM sont requis. Mémoire de stockage requisePrinergy Workflow 9Prinergy Workflow 10.5 0 nécessite des lecteurs système dotés au minimum de 146 Go de 146 Go d'espace de stockage (avec au moins 10 Go d'espace libre) sur les serveurs principaux et des lecteurs système dotés d'un minimum de 73 Go d'espace de stockage (avec au moins 10 Go d'espace libre) sur les serveurs secondaires et les stations de rendu. En cas de mise à niveau à partir d'une version de Prinergy avec Oracle 12.2 ou version antérieure intégrée, assurez-vous, au cours de cette mise à niveau, que vous disposez d'au moins 3x la quantité d'espace disque actuellement occupée par la base de données ( Serveurs Hot Standby (EPM)Prinergy Workflow 9Prinergy Workflow 10.5 0 prend en charge le logiciel Carbonite DoubleCarbonite Double-Take version 8version 8.2/8.4 sous Windows 2016 Windows 2016 et Windows 2019Windows 2019. Les mises à niveau de Double-Take sont effectuées par un technicien Kodak au cours de la mise à niveau du système d'exploitation. |
Sv translation | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| includeDOCL:DOCL:ja_tr |
| _tr||||||||||||||||||||
Prinergy サーバーとワークステーションは、このバージョンの Prinergy でサポートされている特定のハードウェアとソフトウェアの要件を満たす必要があります。 サポートされるサーバーPrinergy Workflow 910.5 0 を使用するには、次のいずれかの Dell プラットフォーム上の Microsoft Windows Server 2016 または Windows Server 2019 が必要です。 Windows 2016 または Windows 2019
仮想環境:Prinergy は、次の仮想プラットフォームでサポートされています。 注意:AMD CPU はサポートされていません
重要:VOE(Virtual Operating Environment)について、コダックは Microsoft オペレーティング システム用ライセンスを提供しません。ライセンスは、任意の Microsoft 販売代理店から購入できます。メモリの必要条件Prinergy プライマリ サーバーと Hot Standby サーバーには 12 GB 以上の RAM が必要です。Prinergy セカンダリ サーバーとレンダー ステーションには 8 GB 以上の RAM が必要です。 ストレージの必要条件Prinergy Workflow 910.5 0 を使用するには、プライマリ サーバーのシステム ドライブに 146 GB 以上の記憶領域(10 GB 以上の空き領域)、セカンダリ サーバーとレンダー ステーションのシステム ドライブに 73 GB 以上の記憶領域(10 GB 以上の空き領域)が必要です。 Oracle 12.2 以前が統合されたバージョンの Prinergy からアップグレードする場合、アップグレードの時点でデータベースに使用されているディスク領域( Hot Standby(EPM)サーバーPrinergy Workflow 910.5 0 は、Windows 2016 および Windows 2019 で Carbonite Double-Take ソフトウェア 8.2 / 82/8.4 をサポートしています。Double-Take のアップグレードは、オペレーティング システムのアップグレード時に Kodak エンジニアが行います。 |
Sv translation | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||
Include Page |
| _tr|||||||||||||||||
I server e le stazioni di lavoro Prinergy devono soddisfare alcuni requisiti hardware e software specifici per essere supportati in questa versione di Prinergy. Server supportatiPrinergy Workflow 910.5 0 richiede Microsoft Windows Server 2016 o Windows Server 2019 su una delle seguenti piattaforme Dell: Windows 2016 o Windows 2019
Ambienti virtuali:Prinergy è supportato sulle seguenti piattaforme virtuali:: NOTA: CPU AMD NON supportate
Importante: Per VOE (Virtual Operating Environment), Kodak non fornisce la licenza per il sistema operativo Microsoft. Le licenze possono essere acquistate tramite un rivenditore Microsoft di propria scelta.Requisiti di memoriaGli Hot Standby Server e i server primari Prinergy richiedono minimo 12 GB di RAM. I server secondari e le stazioni di rendering Prinergy richiedono minimo 8 GB di RAM. Requisiti di archiviazionePrinergy Workflow 910.5 0 richiede minimo 146 GB di spazio di archiviazione (con almeno 10 GB di spazio disponibile) per le unità di sistema sui server primari e minimo 73 GB (con almeno 10 GB di spazio disponibile) per le unità di sistema sui server secondari e sulle stazioni di rendering. Se si esegue l'aggiornamento da una versione di Prinergy con Oracle 12.2 o versioni precedenti, verificare quanto spazio occupa il database sul disco dell'unità corrente ( Server Hot Standby (EPM)Prinergy Workflow 910.5 0 supporta il software Double-Take 8.2/8.4 di Carbonite su Windows 2016 e Windows 2019. Gli aggiornamenti Double-Take vengono effettuati da un tecnico Kodak durante l'aggiornamento del sistema operativo. |